https://community.extremenetworks.com/t5/end-of-service-products/how-to-change-statistic-sample-intervals/m-p/25204#M634 Hi community,<BR /> <BR /> I am collecting port statistics on Summit 48si, but values are set to zero at end of sample interval according to MIB description, see example below:<BR /> - OID: 1.3.6.1.4.1.1916.1.11.1.1.4 extremeRtStatsUndersizePkts<BR /> - OID Description: The number of packets received during the last sampling interval that were less than 64 octets.<BR /> <BR /> My questions are related to sample interval mention above:<BR /> - What is default value of Sample Interval?<BR /> - Is there any way to change Sample Interval value?<BR /> <BR /> Thanks in advance for all collaboration,<BR /> Wanderley Benacchio Junior<BR /> Mon, 23 Jan 2017 22:24:00 GMT Wanderley_Benac 2017-01-23T22:24:00Z https://community.extremenetworks.com/t5/end-of-service-products/how-to-change-statistic-sample-intervals/m-p/25204#M634 Hi community,<BR /> <BR /> I am collecting port statistics on Summit 48si, but values are set to zero at end of sample interval according to MIB description, see example below:<BR /> - OID: 1.3.6.1.4.1.1916.1.11.1.1.4 extremeRtStatsUndersizePkts<BR /> - OID Description: The number of packets received during the last sampling interval that were less than 64 octets.<BR /> <BR /> My questions are related to sample interval mention above:<BR /> - What is default value of Sample Interval?<BR /> - Is there any way to change Sample Interval value?<BR /> <BR /> Thanks in advance for all collaboration,<BR /> Wanderley Benacchio Junior<BR /> Mon, 23 Jan 2017 22:24:00 GMT https://community.extremenetworks.com/t5/end-of-service-products/how-to-change-statistic-sample-intervals/m-p/25204#M634 Wanderley_Benac 2017-01-23T22:24:00Z https://community.extremenetworks.com/t5/end-of-service-products/how-to-change-statistic-sample-intervals/m-p/25205#M635 Wanderley, per the extremeRtStatsIndex, the description states "The last sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the RMON historyControlEntry which set up the parameters for a regular collection of these samples".<BR /> <BR /> Please review the MIB in use for any RMON OIDs and see if there are any options there.<BR /> <BR /> Tue, 07 Feb 2017 22:06:00 GMT https://community.extremenetworks.com/t5/end-of-service-products/how-to-change-statistic-sample-intervals/m-p/25205#M635 Ty_Izzet 2017-02-07T22:06:00Z