Are there any specific configurations or LLDP-MED features on the 4220 that cannot be managed throug

velma41abbott — Thu, 28 Nov 2024 09:16:39 GMT

Hello,

I’m currently working with a 4220 switch and need to configure LLDP-MED. However, I’ve encountered an issue where certain LLDP-MED configuration commands are not allowed via the CLI. Below are the commands I attempted to use:

enable lldp port all

configure lldp port all advertise vendor-specific med capabilities

configure lldp port all advertise vendor-specific med power-via-mdi

configure lldp port all advertise vendor-specific med policy application voice vlan voip dscp 46

configure lldp ports all advertise system-capabilities

configure lldp port all advertise vendor-specific dot1 port-protocol-vlan-id vlan voip

configure lldp ports all advertise vendor-specific dot1 vlan-name vlan voip

Since these commands seem restricted, I’m exploring the following:

SNMPv3 Configuration:
Is it possible to configure LLDP-MED on the 4220 switch using SNMPv3 instead of CLI?

Tool Compatibility:
Can tools like SNMP MIB Browser, snmpget, or snmpset be used to implement LLDP-MED configuration effectively on the 4220?

SNMPv3 Limitations:
Are there any specific configurations or LLDP-MED features on the 4220 that cannot be managed through SNMPv3?

JóvenesenAcción

topic Are there any specific configurations or LLDP-MED features on the 4220 that cannot be managed throug in ExtremeCloud A3

Are there any specific configurations or LLDP-MED features on the 4220 that cannot be managed throug