topic How do I configure A3 to use a VLAN Pool? in ExtremeCloud A3

How do I configure A3 to use a VLAN Pool?

jason_simmons — Wed, 20 Nov 2019 06:57:09 GMT

Devices need to be assigned to one of a pool of VLANs after they register. How do I configure A3 to do that?

Re: How do I configure A3 to use a VLAN Pool?

samantha_lynn — Fri, 22 Nov 2019 04:56:40 GMT

Thank you for your patience while I looked in to this for you. Taken from:

https://packetfence.org/doc/PacketFence_Administration_Guide#_roles_management

"For the VLAN pool instead of defining a VLAN identifier you can set a value like this : 20..23,27..30 , it means that the VLAN returned by PacketFence can be 20 to 23 and 27 to 30 (inclusively). There are two algorithms, one based on a hash of the username (default one) and the other one based on a round-robin (last registered device +1).”

Is that what you were looking for?

Re: How do I configure A3 to use a VLAN Pool?

jason_simmons — Thu, 05 Dec 2019 01:14:08 GMT

Not exactly, but I figured it out. Thanks!