Configuring AP250 Eth1 in Bridge Mode with 5port Mini Switch attached to service other devices. SOLVED

sgeen — Fri, 06 Aug 2021 19:15:00 GMT

Hi,

Just wanted to let folks know since I can’t update my original post that going to version 10.3.3.0 (10.3r3) fixed the issue on AP250. The devices behind the mini switch connected to eth1 on the AP250 now work as expected. I’m going to tag @Sam Pirok to perhaps update my original post if possible.

Thanks,

Shawn

RE: Configuring AP250 Eth1 in Bridge Mode with 5port Mini Switch attached to service other devices. SOLVED

SamPirok — Fri, 06 Aug 2021 21:43:00 GMT

Thanks for the mention here! So glad you were able to find a solution. I’ve opened the original post back up for you, please let me know if I can help with anything else!

topic Configuring AP250 Eth1 in Bridge Mode with 5port Mini Switch attached to service other devices. SOLVED in ExtremeCloud IQ

Configuring AP250 Eth1 in Bridge Mode with 5port Mini Switch attached to service other devices. SOLVED

RE: Configuring AP250 Eth1 in Bridge Mode with 5port Mini Switch attached to service other devices. SOLVED