topic RE: CONFIG POWER - CHANNEL AP305C CLOUD in ExtremeCloud IQ

CONFIG POWER - CHANNEL AP305C CLOUD

D_Paul — Thu, 10 Feb 2022 20:28:00 GMT

HOLA
NO PERMITE CONFIGURAR CANAL Y POTENCIA.
NO MUESTRA SSID CONFIGURADO.
EL MISMO PROBLEMA ESTÁ PASANDO EN VARIAS CUENTAS. ANTES SE PODÍA REALIZAR CONFIGURACIONES POR AP.

¿HAY ALGUNA ACTUALIZACIÓN QUE DEBE HACERSE?

FIRMWARE AP ACTUAL 10.3.3 Y 10.3.4

RE: CONFIG POWER - CHANNEL AP305C CLOUD

Ronald_Dvorak — Thu, 10 Feb 2022 21:55:00 GMT

Hi Dany,

the thing that I've never seen in my setup is that the radio mode field shows "no change".
Could you try another radio profile from the pull down menu and save/update the AP configuration.

It like to see whether that changes anything.

In regards to the SSID > is one configured on the network profile for that AP ?!

-Ron

RE: CONFIG POWER - CHANNEL AP305C CLOUD

Ronald_Dvorak — Thu, 10 Feb 2022 21:56:00 GMT

here my AP...

RE: CONFIG POWER - CHANNEL AP305C CLOUD

D_Paul — Fri, 11 Feb 2022 00:26:00 GMT

hi ronald
I have changed the radio profile and "RADIO MODE" does not show anything.
The AP has a template that broadcasts SSID: "home" and there are currently 01 devices connected.

The changes are saved, the radio profile is updated and returned: RADIO_g0

Radio mode: without showing anything.
When making a change, it does not show channel and power, I have to restore the default to show channel and power again.

RE: CONFIG POWER - CHANNEL AP305C CLOUD

D_Paul — Tue, 22 Feb 2022 00:54:00 GMT

Changing the language to Spanish caused that problem.
Solution: It was changed to English language and now it allows to configure power, channel, ssid.