topic Re: XIQ heat map drawing issue in ExtremeCloud IQ

XIQ heat map drawing issue

Viththahan — Thu, 30 Sep 2021 11:18:45 GMT

I had a tough time sketching this perimeter in XIQ. You can see the perimeter is not horizontal; due to the navigation bar that does not let. Any means to take this navigation bar from the floor diagram plane? or any ways to sketch the parts that come underneath that.?

Re: XIQ heat map drawing issue

SamPirok — Fri, 01 Oct 2021 00:52:09 GMT

Hi there, I might suggest using a slightly smaller image, or adjusting the resolution on the image a bit so the edge of the image doesn’t overlap with the controls there.

That said, if you are able to reach out to your account team to file a feature request, I do think the ability to move those controls out of the way would be a beneficial addition to that page. We can certainly see how it could come in handy here!

If you’re unsure who to reach out to for your account team, please let me know generally where you are located and I will find you a local contact.

Re: XIQ heat map drawing issue

Viththahan — Fri, 01 Oct 2021 11:08:18 GMT

Dear Sam,

I've adjusted the image accordingly and it was done. However, the navigation panel on top of the image made me to edit the image by extending it to the left side.

Thanks for the suggestion.

Regards,

Viththahan