Manage 5420F-48P-4XE as a stack in EIQ?

RJ45 — Thu, 30 Sep 2021 02:21:01 GMT

tl;dr Can I managed stacked 5420’s in EIQ? I don’t see a template. Please tell me there is a template and I can do this.

I just built a stack with 6 5420F-48P-4XE switches which I had previously on-boarded individually into EIQ. I was happy to see the individual switches coalesce and appear as a stack in EIQ. Today I was planning to play around with the template and verify that it is possible to configure an LACP LAG across the first two switches in the stack and add that config to the template. Welp… There is no template. There is one for 5520’s, but none for 5420’s!? Am I missing something here? I thought these switches were to be manageable in EIQ? My customer is fully expecting to be able to login to the GUI and configure edge ports on this stack. 😞

Re: Manage 5420F-48P-4XE as a stack in EIQ?

Dilraj_Singh_Kh — Thu, 30 Sep 2021 07:47:05 GMT

Hi @RJ45 ,

Config for 5420 stack is not supported in XIQ yet. Only monitor mode is supported for now.

topic Re: Manage 5420F-48P-4XE as a stack in EIQ? in ExtremeCloud IQ

Manage 5420F-48P-4XE as a stack in EIQ?

Re: Manage 5420F-48P-4XE as a stack in EIQ?