https://community.extremenetworks.com/t5/extremecloud-iq/manual-transmit-power-not-working/m-p/96213#M3177 <P>Hello Community</P><P>We installed some new AP4000's. We use radioprofiles, however want to do some testing with different Tx power levels. When I configure the manual tx-power of an AP4000, this change is not executed and the power level is still the one configured in the radio profile. Checked by the CLI and the Tx-power of the radio profile is shown, not the Tx-power I manually configured on AP level.</P> Mon, 26 Jun 2023 12:52:21 GMT Hans 2023-06-26T12:52:21Z https://community.extremenetworks.com/t5/extremecloud-iq/manual-transmit-power-not-working/m-p/96213#M3177 <P>Hello Community</P><P>We installed some new AP4000's. We use radioprofiles, however want to do some testing with different Tx power levels. When I configure the manual tx-power of an AP4000, this change is not executed and the power level is still the one configured in the radio profile. Checked by the CLI and the Tx-power of the radio profile is shown, not the Tx-power I manually configured on AP level.</P> Mon, 26 Jun 2023 12:52:21 GMT https://community.extremenetworks.com/t5/extremecloud-iq/manual-transmit-power-not-working/m-p/96213#M3177 Hans 2023-06-26T12:52:21Z https://community.extremenetworks.com/t5/extremecloud-iq/manual-transmit-power-not-working/m-p/96227#M3182 <P>When i had this issue, i had to select the AP, then Actions, and Revert device back to Template Defaults (bets to clone the AP template, give it a name, and then add it to your network policy), after thats done, then try updating your power, and then a delta/full update.</P><P>Thanks, Jason.</P> Tue, 27 Jun 2023 11:11:23 GMT https://community.extremenetworks.com/t5/extremecloud-iq/manual-transmit-power-not-working/m-p/96227#M3182 DeVoID 2023-06-27T11:11:23Z