topic Re: 5420 EXOS switch - how to apply a classification rule in ExtremeCloud IQ

5420 EXOS switch - how to apply a classification rule

Siobhan_Stynes — Wed, 23 Aug 2023 10:35:54 GMT

Hi All

We are trying to write a classificatiion rule for Qty 10 5420F switches -e.g a classfication rule that states a specific list/bulk of IP addresses, should have VLAN 10 assigned to the policy and we are looking to see if anybody has any info on how to do this.

So , for example, if a specific switch with an IP address in the classification rule comes online , it will be assigned VLAN 10.

Hope this request makes some sense !

Thanks

Siobhán

Re: 5420 EXOS switch - how to apply a classification rule

AreckD — Wed, 23 Aug 2023 19:32:36 GMT

Hello,

You can set it to an ip scope within the assignment rules for device template, as long as you already have a default template configured.

Not sure if that's what you were asking, would need clarification on what you mean by assign vlan 10 to the policy, do you mean management vlan?

Areck Degeneffe
Senior Associate Technical Support Engineer / Extreme Networks

Re: 5420 EXOS switch - how to apply a classification rule

Javi_Solis — Thu, 28 Sep 2023 16:28:25 GMT

When creating a VLAN assigned to a port type for a Universal Hardware Switch running Switch Engine you have the option to assign VLAN based on classification. When you define VLAN via classification within a port type, the VLAN will be assigned based on the classification rule you've created. Take a look at Pg. 28 of our ExtremeCloud IQ Universal Switch Deployment Guide for more details -> https://documentation.extremenetworks.com/xiq/switch_deployment_guide/downloads/extremecloud%20iq_universal_switch_deployment_guide.pdf