https://community.extremenetworks.com/t5/extremecloud-iq/ap550-use-eth1-as-bridge/m-p/96941#M3276 <P>no need for help.</P><P>I fixed it with puting the interface in bridge access mode</P><P><EM>interface eth1 mode bridge-access</EM></P><P><EM>interface eth1 mac-learning enable</EM></P><P>&nbsp;</P><P><EM>thank you</EM></P> Thu, 24 Aug 2023 09:16:04 GMT mihai_balaci 2023-08-24T09:16:04Z https://community.extremenetworks.com/t5/extremecloud-iq/ap550-use-eth1-as-bridge/m-p/96934#M3271 <P>Hi all,</P><P>I have a question: I use an ap550 as simple Access point to broadcast 3 SSIDs.</P><P>The AP is connected via ETH0 on POE. I have the ETH1 free and I intend to connect a home appliance device which requires cable connection to it. Is it possible forward this device DHCP request via ETH1 to my firewall (also dhcp server) ?</P><P>thank you</P><P>&nbsp;</P> Wed, 23 Aug 2023 21:20:45 GMT https://community.extremenetworks.com/t5/extremecloud-iq/ap550-use-eth1-as-bridge/m-p/96934#M3271 mihai_balaci 2023-08-23T21:20:45Z https://community.extremenetworks.com/t5/extremecloud-iq/ap550-use-eth1-as-bridge/m-p/96941#M3276 <P>no need for help.</P><P>I fixed it with puting the interface in bridge access mode</P><P><EM>interface eth1 mode bridge-access</EM></P><P><EM>interface eth1 mac-learning enable</EM></P><P>&nbsp;</P><P><EM>thank you</EM></P> Thu, 24 Aug 2023 09:16:04 GMT https://community.extremenetworks.com/t5/extremecloud-iq/ap550-use-eth1-as-bridge/m-p/96941#M3276 mihai_balaci 2023-08-24T09:16:04Z