topic Re: Extremecloudiq - get basic data rate with api/cli in ExtremeCloud IQ

Extremecloudiq - get basic data rate with api/cli

JonasD_Complit — Thu, 18 Jan 2024 19:01:58 GMT

Does any one know how you can get the basic data rates that are configured on the ssid without using the UI of Extremecloudiq? I prefer by api but with cli would also be ok.

Re: Extremecloudiq - get basic data rate with api/cli

Christoph_S — Fri, 19 Jan 2024 13:30:07 GMT

Hello @JonasD_Complit,

You can try CLI commands:

#show run | inc basic

#show run | inc rate

#show run | inc ssid

Any of the above will show you the rates mapped to the SSID.

I hope this helps,

BR,

Re: Extremecloudiq - get basic data rate with api/cli

JonasD_Complit — Fri, 19 Jan 2024 14:30:51 GMT

Thanks a lot. I also found the following: show ssid wiflex