https://community.extremenetworks.com/t5/extremecloud-iq/802-11r-invalid-fte/m-p/63608#M609 <P>Our Zebra scanners does not roam on Extreme AP305C access points when using WPA2 enterprise with FTE (802.11r). However there is no problem with other Extreme access points. Packetcaptures show <STRONG>status code: Invalid FTE (0x0037)</STRONG> in the reassociation response from the access point to the Zebra scanner. I can not find any good explanation for this, someone any idea?</P><P>&nbsp;</P> Tue, 15 Jun 2021 18:39:36 GMT Hans 2021-06-15T18:39:36Z https://community.extremenetworks.com/t5/extremecloud-iq/802-11r-invalid-fte/m-p/63608#M609 <P>Our Zebra scanners does not roam on Extreme AP305C access points when using WPA2 enterprise with FTE (802.11r). However there is no problem with other Extreme access points. Packetcaptures show <STRONG>status code: Invalid FTE (0x0037)</STRONG> in the reassociation response from the access point to the Zebra scanner. I can not find any good explanation for this, someone any idea?</P><P>&nbsp;</P> Tue, 15 Jun 2021 18:39:36 GMT https://community.extremenetworks.com/t5/extremecloud-iq/802-11r-invalid-fte/m-p/63608#M609 Hans 2021-06-15T18:39:36Z https://community.extremenetworks.com/t5/extremecloud-iq/802-11r-invalid-fte/m-p/63609#M610 <P>Hello, I’m sorry for the long wait here, thank you for your patience. I ran this past our XIQ engineers and they requested that we open a case for this issue so we can set up a call and help you one on one. If you could go to our portal at extremeportal.force.com and open a support case, we can help you from there.&nbsp;</P> Thu, 15 Jul 2021 22:06:05 GMT https://community.extremenetworks.com/t5/extremecloud-iq/802-11r-invalid-fte/m-p/63609#M610 SamPirok 2021-07-15T22:06:05Z