https://community.extremenetworks.com/t5/extremecloud-iq/option-to-trunk-or-use-lacp-for-ap-uplinks/m-p/65562#M714 Hi there,<BR /><BR />I currently have an AP302W connected to the network though eth0 and it is managed in XIQ.<BR />The AP has a total of 4 ports, eth0 through eth3, the last three are not in use. I was wondering whether all 4 ports can be trunkd/lagd/lacpd together to increase available bandwidth for connected clients.<BR /><BR />I tried searching for documentation on this subject but have yet to find any match. It may be the wrong search terms being used but I'm hoping someone can provide some insight into this. Sun, 19 Dec 2021 16:12:56 GMT VicR 2021-12-19T16:12:56Z https://community.extremenetworks.com/t5/extremecloud-iq/option-to-trunk-or-use-lacp-for-ap-uplinks/m-p/65562#M714 Hi there,<BR /><BR />I currently have an AP302W connected to the network though eth0 and it is managed in XIQ.<BR />The AP has a total of 4 ports, eth0 through eth3, the last three are not in use. I was wondering whether all 4 ports can be trunkd/lagd/lacpd together to increase available bandwidth for connected clients.<BR /><BR />I tried searching for documentation on this subject but have yet to find any match. It may be the wrong search terms being used but I'm hoping someone can provide some insight into this. Sun, 19 Dec 2021 16:12:56 GMT https://community.extremenetworks.com/t5/extremecloud-iq/option-to-trunk-or-use-lacp-for-ap-uplinks/m-p/65562#M714 VicR 2021-12-19T16:12:56Z https://community.extremenetworks.com/t5/extremecloud-iq/option-to-trunk-or-use-lacp-for-ap-uplinks/m-p/65563#M715 Vic,<BR /><BR />the 3 ports are client ports and can't be used for mgmt traffic.<BR /><BR />-Ron Sun, 19 Dec 2021 18:04:51 GMT https://community.extremenetworks.com/t5/extremecloud-iq/option-to-trunk-or-use-lacp-for-ap-uplinks/m-p/65563#M715 Ronald_Dvorak 2021-12-19T18:04:51Z