topic Function and timing of the "session persistence" feature in ExtremeCloud IQ Controller

Function and timing of the "session persistence" feature

Mjlopez — Thu, 14 Jan 2021 12:36:06 GMT

Hi:

We have configured the "session persistence" in a site in a WLC XCC, however I have the doubt, how long is it able to maintain the session of the authenticated users (PSK) in an Access Point, after losing communication with the WLC? If you could share an experience with me with this feature enabled, I would appreciate it.

Re: Function and timing of the "session persistence" feature

Miguel-Angel_RO — Thu, 14 Jan 2021 17:47:58 GMT

Hi Mjlopez,

I never paid attention to this point when the AP is off line but the session time out are defined in the advanced tab of the SSID.

Here a screen shot:

I would imagine this parameters should be taken into account.

If someone as field experience on that it would be great.

Mig

Re: Function and timing of the "session persistence" feature

Ronald_Dvorak — Thu, 14 Jan 2021 19:42:32 GMT

Hi Mjlopez,

the answer is forever.

The first article tells you that the function was just copied from Identify and the second one goes in more detail about the function.

https://extremeportal.force.com/ExtrArticleDetail?an=000086773

https://extremeportal.force.com/ExtrArticleDetail?an=000082623

I’ve used that feature i.e. to configure an AP as an site survey AP - after the config was done the controller wasn’t longer required and I’d put it in my car and if I’d need one to survey a new client I’ve one preconfigured.

Cheers,

Ron