https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/port-error-snmp-trap/m-p/20888#M1173 I do not know of a way to make the switch send out a trap based on a threshold alarm on interfaces stats. With that being said your snmp trap receiver should also be able to pull stats and you should be able to set up custom warnings based on thresholds crossed. <BR /> <BR /> Thu, 16 Aug 2018 23:22:00 GMT EtherMAN 2018-08-16T23:22:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/port-error-snmp-trap/m-p/20887#M1172 How can I configure an XOS switch to send an snmp trap to Netsight when crc errors on a port exceed a set threshold? Testing on a X450G2, ver. 22.4 Thu, 16 Aug 2018 19:16:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/port-error-snmp-trap/m-p/20887#M1172 Jeff_Roberts 2018-08-16T19:16:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/port-error-snmp-trap/m-p/20888#M1173 I do not know of a way to make the switch send out a trap based on a threshold alarm on interfaces stats. With that being said your snmp trap receiver should also be able to pull stats and you should be able to set up custom warnings based on thresholds crossed. <BR /> <BR /> Thu, 16 Aug 2018 23:22:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/port-error-snmp-trap/m-p/20888#M1173 EtherMAN 2018-08-16T23:22:00Z