topic Re: Asset Inventory (preferably using XIQ) including members of stacks in ExtremeCloud IQ- Site Engine Management Center

Asset Inventory (preferably using XIQ) including members of stacks

XTRMUser — Wed, 21 May 2025 19:58:12 GMT

Hi all,

I'm supposed to come up with an inventory of Extreme switches in our network. I can export the device list in the /world site, but it doesn't have members of my stacks. Example: Stack "MyStack" only shows one entry, making it impossible to tell if this is a single switch or a stack.

In my case, all my stacks are ERS.

What options to do I have to come up with a complete list of Extreme switches in my network?

Thanks.

Re: Asset Inventory (preferably using XIQ) including members of stacks

XTRMUser — Wed, 21 May 2025 19:59:25 GMT

I should add, this is for XIQ-SE.

Thanks

Re: Asset Inventory (preferably using XIQ) including members of stacks

Bill_Handler — Thu, 22 May 2025 12:21:16 GMT

XTRMUser,

We have used the script from Extreme's GitHub for the License Calculation... That should give you all the devices that require a license in a .csv file. Since each switch needs a license, the switches within the stack show up. You should be able to tell the stack they are in since it also has an IP Address column.

Thanks,

Bill

Re: Asset Inventory (preferably using XIQ) including members of stacks

Robert_Haynes — Thu, 22 May 2025 12:21:48 GMT

If you select a switch, a group of switches or all of them and right-click -> Export Serial Numbers you should be able to export full a full list of devices by IP including modules/slots/serial information (and other sensor/chassis type information). From there you can filter out what you don't need to see what you do.

See

https://extreme-networks.my.site.com/ExtrArticleDetail?an=000116063

https://extreme-networks.my.site.com/ExtrArticleDetail?an=000083011

Re: Asset Inventory (preferably using XIQ) including members of stacks

Markus_Nikulski — Thu, 22 May 2025 13:32:06 GMT

There is a workflow available that pulls all the serials from any component so far the switch type is supported. YOu go to GitHub Extreme Networks.
ExtremeScripting/XMC_XIQ-SE/oneview_workflows at master · extremenetworks/ExtremeScripting

and search for Inventory check

Re: Asset Inventory (preferably using XIQ) including members of stacks

XTRMUser — Tue, 27 May 2025 21:56:30 GMT

This is good, but gives a lot of info. Like you said you can filter it. Thanks.

Re: Asset Inventory (preferably using XIQ) including members of stacks

XTRMUser — Tue, 27 May 2025 21:57:24 GMT

Thanks Markus. Since this is a workflow, I have downloaded and installed it. I'll probably modify it to give us the info we want.

Re: Asset Inventory (preferably using XIQ) including members of stacks

XTRMUser — Tue, 27 May 2025 21:59:23 GMT

I do have this script, but Extreme people loaded it up and used. When I ran it, I had a mysql error on the 2nd step. So I didn't take time to pursue it further. But thanks for the link.