https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/how-to-get-started-with-site-engine/m-p/122538#M12957 <P>Thanks, but first article was about changing VLAN/ISID during ZTP+ process. I'm not that far in to the process as I'm unable to get the devices provisioned at all, I'll worry about VLANs later if I get any success</P> Sun, 06 Sep 2026 23:21:27 GMT juajua 2026-09-06T23:21:27Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/how-to-get-started-with-site-engine/m-p/122532#M12955 <P>Hi, I'm new to Extreme Networks and wanted to a quick lab with eve-ng and Extreme VOSS image. I've set up the Site Engine, DHCP/DNS/etc required to get basic connectivity work. Created a new site in Site Engine, and configured SSH admin password and added a binding rule to put devices from my lab network to the newly created site. Devices boot and show up in discovered tab with "ZTP+ Configuration Error" message. Event log says "<SPAN>No bindings applied to device.".</SPAN></P><P>I think I'm missing some basic configuration but was unable to find any "getting started guide" or something. User guide is 2000 pages so for a quick lab a bit too much to read <span class="lia-unicode-emoji" title=":slightly_smiling_face:">🙂</span></P><P>Any ideas what I need to configure to get started or any tips for relevant instructions/training videos/other. I'll of course ask our local Extreme Networks guys next week but have some free time for labbing now and I'm interested to see how this works.</P><P>Are there any limitations for basic testing that I can't do with VOSS? I'm thinking about trying just basic L2/L3 VSNs and maybe multi-area if it's supported.</P><P>Thanks!</P> Sat, 05 Sep 2026 14:52:21 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/how-to-get-started-with-site-engine/m-p/122532#M12955 juajua 2026-09-05T14:52:21Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/how-to-get-started-with-site-engine/m-p/122537#M12956 <P>Hello,<BR /><BR />Check out the following article on ZTP+ Onboarding using L2 VSNs:&nbsp;<BR /><BR /><A href="https://extreme-networks.my.site.com/ExtrArticleDetail?an=000121947" target="_blank">https://extreme-networks.my.site.com/ExtrArticleDetail?an=000121947</A><BR /><BR />We also have a workflow that can use a CSV to assign IP address/Site:&nbsp;<BR /><BR /><A href="https://github.com/extremenetworks/ExtremeScripting/blob/master/XMC_XIQ-SE/oneview_workflows/xwf/Onboard_VSP-26.02.12.14v187.xwf" target="_blank">https://github.com/extremenetworks/ExtremeScripting/blob/master/XMC_XIQ-SE/oneview_workflows/xwf/Onboard_VSP-26.02.12.14v187.xwf</A><BR /><BR />Usage:&nbsp;<BR /><A href="https://github.com/extremenetworks/ExtremeScripting/blob/master/XMC_XIQ-SE/oneview_workflows/xwf/Onboard_VSP_Workflow.pdf" target="_blank">https://github.com/extremenetworks/ExtremeScripting/blob/master/XMC_XIQ-SE/oneview_workflows/xwf/Onboard_VSP_Workflow.pdf</A></P><P>&nbsp;</P><P>Thanks</P><P>-Ryan</P> Sun, 06 Sep 2026 17:18:43 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/how-to-get-started-with-site-engine/m-p/122537#M12956 Ryan_Yacobucci 2026-09-06T17:18:43Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/how-to-get-started-with-site-engine/m-p/122538#M12957 <P>Thanks, but first article was about changing VLAN/ISID during ZTP+ process. I'm not that far in to the process as I'm unable to get the devices provisioned at all, I'll worry about VLANs later if I get any success</P> Sun, 06 Sep 2026 23:21:27 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/how-to-get-started-with-site-engine/m-p/122538#M12957 juajua 2026-09-06T23:21:27Z