topic bcmPseReceiveMessageString: timed out in ExtremeCloud IQ- Site Engine Management Center

bcmPseReceiveMessageString: timed out

davidj_cogliane — Thu, 30 Nov 2017 01:47:00 GMT

I would like to create an alarm in NetSight to monitor for future PoE failures which create these log messages.
bcmPseReceiveMessageString: timed out

Is there a trap I can turn on?

RE: bcmPseReceiveMessageString: timed out

Patrick_Voss — Thu, 30 Nov 2017 02:36:00 GMT

Hello David,

The below article should help with achieving this:

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-send-an-SNMP-trap-based-on-a-log-me...

Hope this helps!

RE: bcmPseReceiveMessageString: timed out

Bin — Thu, 30 Nov 2017 08:04:00 GMT

These is another discussion in Hub. Maybe give you some hit.

How send a SNMP Traps test to the Network Management?
https://community.extremenetworks.com/extreme/topics/how-send-a-snmp-traps-test-to-the-network-manag...

Hope it also helps.

RE: bcmPseReceiveMessageString: timed out

davidj_cogliane — Tue, 12 Dec 2017 03:06:00 GMT

I have now lowered the radio to 1x1.

and that does not change any behaviour on the AP.

CHANNEL : Current: 100 Configured: 100 Width: 20MHz
TRANSMIT POWER : 17 dBm
ANTENNA USAGE : 1x1

transmit power is what AP is selecting it self.

I have configured it for 30dBm EIRP.

RE: bcmPseReceiveMessageString: timed out

davidj_cogliane — Tue, 19 Dec 2017 23:43:00 GMT

I resolved the issue.

I changed the order I pasted the commands in and that resulted in the line referencing the log filter erroring out. As a result it created a upm event for every log message that the switch saw.

All good and working properly now.