topic Can EMC display LLDP neighbor info? in ExtremeCloud IQ- Site Engine Management Center

Can EMC display LLDP neighbor info?

Ian_Broadway — Mon, 19 Feb 2018 17:43:00 GMT

Hello,

I Would like to find out about the above, specifically i would like to know how many Reach NXT devices we have on the network without having to display lldp info from each switch.

I'm sure back in the day Extremes old management platform, EpiCentre/Ridgeline did this but i can't work out how to in EMC.

Thanks
Ian

RE: Can EMC display LLDP neighbor info?

Furkan_Sabanci — Mon, 19 Feb 2018 17:58:00 GMT

Hi Ian,

Right click to your device on EMC->Network->Devices part and choose view->flexview and there is an option "LLDP Remote Systems"

this will show you all lldp-enabled devices.

RE: Can EMC display LLDP neighbor info?

Ian_Broadway — Mon, 19 Feb 2018 18:03:00 GMT

thank you for that.

can it be done for the network as a whole? it seems to default to a particular switch each time I run it.

I'm highlighting in the tree view, "My Network" then using the 3 horizontal line menu to choose view etc.

RE: Can EMC display LLDP neighbor info?

Furkan_Sabanci — Mon, 19 Feb 2018 18:19:00 GMT

as far as I know, it's only showing for one device.

RE: Can EMC display LLDP neighbor info?

Zdeněk_Pala — Tue, 20 Feb 2018 00:16:00 GMT

Hi.

You can select set of swtiches and run the flexview on set of switches.
There were different limits in the past for different XMC/EMC versions.
If web interface does not allow you to run the flexview on all your network then Java client does it without issues.

Z.

RE: Can EMC display LLDP neighbor info?

Ian_Broadway — Tue, 20 Feb 2018 18:38:00 GMT

is there a way a feature can be added to display Reach NXTs separately? for instance listed in the device view? they are essentially separate devices.......