https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/policy-manager-will-not-put-frozen-ports-into-inactive-default/m-p/23625#M1694 GTAC has created a NetSight policy case to come to a resolution. <BR /> Thu, 04 Aug 2016 18:54:00 GMT Brian_Townsend 2016-08-04T18:54:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/policy-manager-will-not-put-frozen-ports-into-inactive-default/m-p/23622#M1691 When adding some of the C5 switches into Policy Manager (PM) we get this error:<BR /> ERROR : SNMP Error: 129 (129). The attribute(s) contained in the failed SNMP packet were: etsysPwaSystemEnhancedModeRefreshTime.0 (No Such Instance currently exists at this OID)<BR /> <BR /> The switch is added into PM, then added into the NAC. The ports are then retrieved in PM and uplinks/interswitch ports are frozen. Then on the Authentication tab, the multi-user is set and authentication status is set to enable, adjust the auth type precedences and then apply. That is when the preceding error appears in Netsight and the ports do not get set to inactive/default roles. It seems very inconsistent and the firmware version does not seem to matter.<BR /> Thu, 07 Jul 2016 22:55:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/policy-manager-will-not-put-frozen-ports-into-inactive-default/m-p/23622#M1691 John_Pfrimmer 2016-07-07T22:55:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/policy-manager-will-not-put-frozen-ports-into-inactive-default/m-p/23623#M1692 Make your changes to the ports then freeze them. Do not freeze them before making any config changes. Why are you enabling authentication on the uplinks? Thu, 07 Jul 2016 23:12:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/policy-manager-will-not-put-frozen-ports-into-inactive-default/m-p/23623#M1692 Jeremy_Gibbs 2016-07-07T23:12:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/policy-manager-will-not-put-frozen-ports-into-inactive-default/m-p/23624#M1693 Sorry I did not describe that part enough. We are not enabling authentication on the uplinks. We are preparing the switches for NAC/Policy so all roles and rules are turned off. This is just when the switch is selected and going to the authentication tab for global setup. A pop up appears to place all frozen ports in an inactive/default role. Port configuration is the next step in the instructions we were given. Its worked fine for most of our switches.<BR /> Thu, 07 Jul 2016 23:44:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/policy-manager-will-not-put-frozen-ports-into-inactive-default/m-p/23624#M1693 John_Pfrimmer 2016-07-07T23:44:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/policy-manager-will-not-put-frozen-ports-into-inactive-default/m-p/23625#M1694 GTAC has created a NetSight policy case to come to a resolution. <BR /> Thu, 04 Aug 2016 18:54:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/policy-manager-will-not-put-frozen-ports-into-inactive-default/m-p/23625#M1694 Brian_Townsend 2016-08-04T18:54:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/policy-manager-will-not-put-frozen-ports-into-inactive-default/m-p/23626#M1695 I have seen this issue 10,000 times. Glad to see GTAC is working on it. Thu, 04 Aug 2016 19:07:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/policy-manager-will-not-put-frozen-ports-into-inactive-default/m-p/23626#M1695 Jeremy_Gibbs 2016-08-04T19:07:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/policy-manager-will-not-put-frozen-ports-into-inactive-default/m-p/23627#M1696 Jeremy, <BR /> Once GTAC has a resolution path, we will share it on this thread. Thu, 04 Aug 2016 19:17:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/policy-manager-will-not-put-frozen-ports-into-inactive-default/m-p/23627#M1696 Brian_Townsend 2016-08-04T19:17:00Z