topic RE: C5210 and V2110 configuration backup via XMC. in ExtremeCloud IQ- Site Engine Management Center

C5210 and V2110 configuration backup via XMC.

Rahman_Duran — Thu, 01 Nov 2018 19:07:00 GMT

Hi,

When I try to backup controllers configuration via XMC (ver. 8.1.5.22) I get the following error:

Archive Save Management Center Archive: (192.168.10.122) Version Stamp: Nov 1, 2018 3:54:29 PM - Configuration Upload script is empty in file Enterasys Networks Wireless Controller - SCP :

Is this a known problem?

Regards,

Rahman

RE: C5210 and V2110 configuration backup via XMC.

Ronald_Dvorak — Thu, 01 Nov 2018 20:25:00 GMT

Works for me so not a general problem.

RE: C5210 and V2110 configuration backup via XMC.

StephanH — Fri, 02 Nov 2018 03:53:00 GMT

Hello Rahman,

did you check the settings for backup here (like transfer method...)

Regards
Stephan

RE: C5210 and V2110 configuration backup via XMC.

Ryan_Yacobucci — Sun, 04 Nov 2018 03:28:00 GMT

Hello,

Check out this article:

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-use-Inventory-Manager-to-backup-Ide...

It's a little old, but you should be able to find the same option in Extreme Management Center --> Administration --> Options

Let me know if this helps. I'll flag the article to be updated.

Thanks
-Ryan

RE: C5210 and V2110 configuration backup via XMC.

Rahman_Duran — Sun, 04 Nov 2018 03:28:00 GMT

Hello Ryan,

Yes, I checked the scp server password, it is OK. The error says script is empty but it is definitely not:

RE: C5210 and V2110 configuration backup via XMC.

StephanH — Sun, 04 Nov 2018 03:28:00 GMT

Hello Rahman,

as I posted above you should use controlled by device type not Script.

Best regards
Stephan

RE: C5210 and V2110 configuration backup via XMC.

Rahman_Duran — Sun, 04 Nov 2018 03:28:00 GMT

Hello Stephan, There is no such option on my side.

RE: C5210 and V2110 configuration backup via XMC.

Ronald_Dvorak — Sun, 04 Nov 2018 23:31:00 GMT

I think the main question is did you upgrade XMC to that version and it was working before or is that a fresh install / you enabled archive the first time.

RE: C5210 and V2110 configuration backup via XMC.

Rahman_Duran — Sun, 04 Nov 2018 23:31:00 GMT

No, I was not backing up them via XMC before. So I don't know it it were working with previous versions.

RE: C5210 and V2110 configuration backup via XMC.

Ronald_Dvorak — Tue, 06 Nov 2018 18:46:00 GMT

I get the same error with the settings you've posted in the screenshot.
Change it to the below - that works for me....

RE: C5210 and V2110 configuration backup via XMC.

Rahman_Duran — Tue, 06 Nov 2018 21:35:00 GMT

Using these settings worked, thank you.