topic Time-lapse location is not available because the search result is not Triangulated. in ExtremeCloud IQ- Site Engine Management Center

Time-lapse location is not available because the search result is not Triangulated.

Steve_Ballantyn — Thu, 11 Aug 2016 20:43:00 GMT

At some point in the upgrade path to v7 of Netsight, I started getting this error message when I am attempting to use the Time-lapse Location checkbox on my maps to track wireless clients. It seems pretty random. But even when I am able to activate it, it only shows the last 'hit' (around the past 10 minutes) and then I am not able to click the forward/backward buttons.

Is this because I am missing tracking data? Or or something else broken?

I am running:
NetSight Suite v7.0.3.12
IdentiFi v10.11.01.0210

RE: Time-lapse location is not available because the search result is not Triangulated.

Bob_Maheu — Thu, 18 Aug 2016 22:45:00 GMT

Hello Steve,

If possible upgrade to version 7.0.4.29 of Extreme Management (NetSight). There was an issue with Time-lapse between the 7.03.12 and wireless controller 10.11.x firmware that has been corrected

RE: Time-lapse location is not available because the search result is not Triangulated.

Steve_Ballantyn — Thu, 18 Aug 2016 22:45:00 GMT

Hi Bob, thanks for the post. I upgraded to 7.0.4.29 shortly after posting this but hadn't retried it. Sure enough, the upgrade had fixed it and the feature is working again.

Thanks again!