topic RE: EMC Tuning 8.03 in ExtremeCloud IQ- Site Engine Management Center

EMC Tuning 8.03

Jairo_Rojas_Her — Tue, 03 Oct 2017 23:49:00 GMT

As I can have through snmpv3 all the statistics of CPU, memory plus all the data of the statistics of the interfaces that are monitored.

I also need to fine tune all the EMC features for other vendor in this case I require on CISCO.

Thank you for your contribution and collaboration.

RE: EMC Tuning 8.03

Bharathiraja__S — Thu, 05 Oct 2017 06:39:00 GMT

Hi Jairo,

Could you explain what you have configured and what is not working on other vendor# ?

Thanks,
Suresh.B

RE: EMC Tuning 8.03

Jairo_Rojas_Her — Thu, 05 Oct 2017 06:39:00 GMT

Hi Bharathiraja

I have some devices of differents vendor: Cisco Catalys, Cisco Nexus, Extreme, Avaya.

View Cisco Device

View Avaya Device

This is the configuration snmpv2 to Cisco "snmp-server group BCNOC v3 priv
snmp-server user snmpc0rr3v4l BCNOC v3 auth md5 snmpc0rr3v4l priv aes128 snmpc0rr3v4l"

RE: EMC Tuning 8.03

Zdeněk_Pala — Thu, 05 Oct 2017 06:39:00 GMT

Avaya will be supported in 8.0.4 version. very soon!
We can do some cool staff with Vendor Profiles with version 8.0 already. We will be doing magic in version 8.1. stay tuned.

RE: EMC Tuning 8.03

Zdeněk_Pala — Thu, 05 Oct 2017 06:39:00 GMT

in the meantime you can use flexviews

RE: EMC Tuning 8.03

Jairo_Rojas_Her — Thu, 05 Oct 2017 06:39:00 GMT

Thanks for the data, but how can I receive EMC notifications from TRAPS and SYSLOG?

RE: EMC Tuning 8.03

Zdeněk_Pala — Thu, 05 Oct 2017 06:39:00 GMT

Hi. EMC can receive syslog from any source. EMC can receive snmp traps from any source aswell. And SNMP informs also. Regarding traps and informs if you update MIBs then the OIDs will be translated also. With 8.0.4 events and alarms from Avaya should be “recognized” and incorporated. Z.

RE: EMC Tuning 8.03

Bharathiraja__S — Sun, 08 Oct 2017 13:44:00 GMT

Hi Jairo,

Adding to previous comment please check below KB for more details about alarm and syslog.

https://gtacknowledge.extremenetworks.com/articles/How_To/Netsight-How-to-Configure-an-Alarm-to-Trig...

Thanks,
Suresh.B