topic RE: Change time and timezone in netsight virtual appliance in ExtremeCloud IQ- Site Engine Management Center

Change time and timezone in netsight virtual appliance

Ledesma — Wed, 19 Nov 2014 06:29:00 GMT

Hello,

We did a new installation, but during intial setup the time & timezone was set incorrectly. Now the server is up and running. How can we change the time & timezone?

Thanks.

RE: Change time and timezone in netsight virtual appliance

Ronald_Dvorak — Thu, 20 Nov 2014 03:02:00 GMT

The system has the following sricpts for postinstall changes installed in the /usr/postinstall directory...

network config = dnetconfig
SNMP config = snmpconfig
date/time = dateconfig

RE: Change time and timezone in netsight virtual appliance

Ledesma — Thu, 20 Nov 2014 04:29:00 GMT

Thank you Ronald. I called to GTAC and they told me the same. Already change the time successfully.

RE: Change time and timezone in netsight virtual appliance

Michael_Kirchne — Wed, 11 Mar 2015 21:54:00 GMT

Hi@all

I've got a similar issue but dateconfig changes only the system time:
Output of #date

Timezone in Inventorymanager (VET):

I also restarted the server.

Any idea?

Best Regards
Michael

RE: Change time and timezone in netsight virtual appliance

Ronald_Dvorak — Thu, 12 Mar 2015 18:18:00 GMT

I had such problem but I can't remember the details.... I think the issue was a wrong date/time setting on the VM server.
It was a little bit weird that the VM date/time mess up the NAC/Netsight time - so might be a good idea to check the VM date/time settings.
Mine is now also running on the same NTP as Netsight.