topic RE: NetSight CPU Utilization very high when editing maps in ExtremeCloud IQ- Site Engine Management Center

NetSight CPU Utilization very high when editing maps

Chacko — Mon, 06 Feb 2017 17:47:00 GMT

NetSight 7.0.6.27 got a constant cpu load by 50-70% per core when editing maps.
It doesn't matter, if it's a wifi-map or a normal device-map.
That can't be normal, you need to wait 3-4 minutes, before you can can use the NetSight again.

Does anyone has an idea what to do?

RE: NetSight CPU Utilization very high when editing maps

Zdeněk_Pala — Mon, 06 Feb 2017 20:20:00 GMT

Please specify if the high CPU is on client or on server.
AFAIK it is not expected behaviour.

RE: NetSight CPU Utilization very high when editing maps

Chacko — Mon, 06 Feb 2017 20:20:00 GMT

I'm connected to the NetSight server via ssh.
With top and "1" (to see each cpu-core) I can see, that each core got a utilization from 60-70% after editing a map. After a few minutes everything is fine and NetSight is usable again. Until that, the whole NetSight (even the Java-Consoles) are too slow to work with them

RE: NetSight CPU Utilization very high when editing maps

Drew_C — Wed, 22 Feb 2017 02:11:00 GMT

Hello Chacko, do you still need assistance with this issue?

RE: NetSight CPU Utilization very high when editing maps

Chacko — Wed, 22 Feb 2017 02:11:00 GMT

Our service partner opened a ticket at Extreme, so there should be an answer soon.