topic RE: Netsight 6.2.0 - Topology Manager - No conenctions drawing in ExtremeCloud IQ- Site Engine Management Center

Netsight 6.2.0 - Topology Manager - No conenctions drawing

holden — Fri, 21 Aug 2015 21:34:00 GMT

Hi,

im using netsight 6.2 and tried to create a topology map from my discovered devices. The Devices from my group are shown, but the topology doesnt show any connection betwenn the devices. in other words it doesnt draw the lines between them....even if i select overlay physical.

Any suggestions?

Thanks in advance

RE: Netsight 6.2.0 - Topology Manager - No conenctions drawing

Curtis_Parish1 — Fri, 21 Aug 2015 21:55:00 GMT

Verify a discovery protocol like CDP, CiscoDP, or LLDP is running on your devices and make sure that protocol is selected when you create the map.

RE: Netsight 6.2.0 - Topology Manager - No conenctions drawing

holden — Mon, 24 Aug 2015 13:30:00 GMT

Hi and thanks,

im wondering about this. Doesnt it support EDP?

RE: Netsight 6.2.0 - Topology Manager - No conenctions drawing

Frank_Thomas — Tue, 25 Aug 2015 00:00:00 GMT

Have you tried using maps in Oneview instead of Topology Manager?