topic RE: OneView Maps with HP Switches in ExtremeCloud IQ- Site Engine Management Center

OneView Maps with HP Switches

Gordon_Von_Asch — Mon, 29 Feb 2016 16:03:00 GMT

Hello,

we have a customer with many Extreme Switches, but he also has many HP Switches left. We can manage them with the inventory manager as well and they are able to see their neighbors with all details when we look at the cli: show lldp info remote-devices

The problem/question:
Onn the One View map, we can't see the links between the HP Switches, only if a extreme Switch is related. Has anybody an advice how we can see the links between two HP Switches? Is this generaly possible?

Thanks in advance

Gordon

RE: OneView Maps with HP Switches

Curtis_Parish1 — Mon, 29 Feb 2016 21:28:00 GMT

Is LLDP selected in OneView? In topology manager LLDP is not discovered by default.

RE: OneView Maps with HP Switches

Gordon_Von_Asch — Mon, 29 Feb 2016 21:40:00 GMT

How do I select LLDP in OneView? I can't find it 😞

RE: OneView Maps with HP Switches

Curtis_Parish1 — Mon, 29 Feb 2016 21:57:00 GMT

I can't either. One of the many reasons I still use topology manager in console.

RE: OneView Maps with HP Switches

Tony_Thornton — Mon, 07 Mar 2016 22:54:00 GMT

I don't think there is a way to configure which discovery protocol that OneView uses like you could with Topology Manager in Console.
Do the links appear in the Network Details > Link Summary section (to the right of the map)?
Have you tried to rediscover/refresh the HP devices and see if that helps?
If the issue is still occurring you may want to open a new case with GTAC to troubleshoot further.