https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/display-issues-in-emc/m-p/29558#M2910 Hi together,<BR /> <BR /> we have massive problems with EMC, p.e. the search field ist not displaying, in a wrong position, or if we open a end-system under "control" we see a fault view (too small) and no tabs appear.<BR /> Extreme cannot resolve this issue and there is no solution until this moment.<BR /> But I have found a workaround. If I deactivate the "live" view under:<BR /> Administration &gt; Options &gt; Access Control &gt; Live End-Systems Table Updates<BR /> the live view is per default in the status "paused" and all works fine.<BR /> <BR /> Maybe this will help other people with similar problems.<BR /> <BR /> Regards<BR /> <BR /> Michael Fri, 15 Mar 2019 14:53:00 GMT TeamNetzBetrieb 2019-03-15T14:53:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/display-issues-in-emc/m-p/29558#M2910 Hi together,<BR /> <BR /> we have massive problems with EMC, p.e. the search field ist not displaying, in a wrong position, or if we open a end-system under "control" we see a fault view (too small) and no tabs appear.<BR /> Extreme cannot resolve this issue and there is no solution until this moment.<BR /> But I have found a workaround. If I deactivate the "live" view under:<BR /> Administration &gt; Options &gt; Access Control &gt; Live End-Systems Table Updates<BR /> the live view is per default in the status "paused" and all works fine.<BR /> <BR /> Maybe this will help other people with similar problems.<BR /> <BR /> Regards<BR /> <BR /> Michael Fri, 15 Mar 2019 14:53:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/display-issues-in-emc/m-p/29558#M2910 TeamNetzBetrieb 2019-03-15T14:53:00Z