https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/how-to-alert-for-uplink-rx-or-tx-errors-on-uplink-port-xos-and/m-p/30843#M3159 Hello,<BR /> <BR /> We use netsight 7.1 console to do basic traps and syslog. Is it possible, that netsight could send me an email alert if a problem was seen on an *uplink* port to a stack. I don't want to have to manually run a report, I'd like to have an email sent out like we have for our traps.<BR /> <BR /> Setup: 460 g1s running 16 code (XOS) ports 1:53-54 are shared lacp<BR /> <BR /> Sometimes the fiber at our locations degrades overtime and affects the uplink (Massive TX or RX errors are seen with the show port 1:53-54 rx or tx is ran). <BR /> <BR /> Is there a way for netsight or the switch itself to monitor these ports, so we can be alerted when things start building up? We have port elements setup in netsight, but I can't seem to see any option that would fit in that setup.<BR /> <BR /> Any other options you can think of?<BR /> <BR /> Thank you,<BR /> <BR /> Sarah<BR /> <BR /> Mon, 18 Dec 2017 23:44:00 GMT Sarah_Seidl 2017-12-18T23:44:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/how-to-alert-for-uplink-rx-or-tx-errors-on-uplink-port-xos-and/m-p/30843#M3159 Hello,<BR /> <BR /> We use netsight 7.1 console to do basic traps and syslog. Is it possible, that netsight could send me an email alert if a problem was seen on an *uplink* port to a stack. I don't want to have to manually run a report, I'd like to have an email sent out like we have for our traps.<BR /> <BR /> Setup: 460 g1s running 16 code (XOS) ports 1:53-54 are shared lacp<BR /> <BR /> Sometimes the fiber at our locations degrades overtime and affects the uplink (Massive TX or RX errors are seen with the show port 1:53-54 rx or tx is ran). <BR /> <BR /> Is there a way for netsight or the switch itself to monitor these ports, so we can be alerted when things start building up? We have port elements setup in netsight, but I can't seem to see any option that would fit in that setup.<BR /> <BR /> Any other options you can think of?<BR /> <BR /> Thank you,<BR /> <BR /> Sarah<BR /> <BR /> Mon, 18 Dec 2017 23:44:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/how-to-alert-for-uplink-rx-or-tx-errors-on-uplink-port-xos-and/m-p/30843#M3159 Sarah_Seidl 2017-12-18T23:44:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/how-to-alert-for-uplink-rx-or-tx-errors-on-uplink-port-xos-and/m-p/30844#M3160 Hi !<BR /> <BR /> If you see these errors on interface statistics for<BR /> <BR /> Statistic Name: Interface % Error Packets. Source: ifInDiscards + ifOutDiscards + ifInErrors + ifOutErrors + ifInUnknownProtos<BR /> <BR /> you can use a threshold alarm in Netsight alarm manager for %error packets. For this you need to enable interface monitoring (Monitor - Save statistics for 1 hour and then drop. Use this mode for threshold alarms.) on the ports you want to monitor.<BR /> <BR /> I am not sure if you will see all the errors there but it can be an indicator.<BR /> <BR /> br<BR /> Volker<BR /> <BR /> Tue, 19 Dec 2017 00:04:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/how-to-alert-for-uplink-rx-or-tx-errors-on-uplink-port-xos-and/m-p/30844#M3160 Volker_Kull 2017-12-19T00:04:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/how-to-alert-for-uplink-rx-or-tx-errors-on-uplink-port-xos-and/m-p/30845#M3161 thanks for the idea, will check it out Thu, 21 Dec 2017 01:09:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/how-to-alert-for-uplink-rx-or-tx-errors-on-uplink-port-xos-and/m-p/30845#M3161 Sarah_Seidl 2017-12-21T01:09:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/how-to-alert-for-uplink-rx-or-tx-errors-on-uplink-port-xos-and/m-p/30846#M3162 Hi Sarah,<BR /> <BR /> Adding to Volker, check this article <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-an-alarm-to-trigger-on-interface-errors" target="_blank" rel="nofollow noreferrer noopener">https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-an-alarm-to-trigger-on-inter...</A><BR /> <BR /> Thu, 21 Dec 2017 19:36:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/how-to-alert-for-uplink-rx-or-tx-errors-on-uplink-port-xos-and/m-p/30846#M3162 Karthik_Mohando 2017-12-21T19:36:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/how-to-alert-for-uplink-rx-or-tx-errors-on-uplink-port-xos-and/m-p/30847#M3163 That looks promising, thank you! Thu, 21 Dec 2017 20:11:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/how-to-alert-for-uplink-rx-or-tx-errors-on-uplink-port-xos-and/m-p/30847#M3163 Sarah_Seidl 2017-12-21T20:11:00Z