https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/using-oneview-to-upgrade-xos-on-switch-don-t-reboot/m-p/31546#M3305 DH,<BR /> We have found this issue on a customer site as well.<BR /> Please open up a case with the GTAC under NMS for now.<BR /> <BR /> See article below - <BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/x4XX-set-for-scheduled-reboot-in-Extreme-Management-Center-does-not-work" target="_blank" rel="nofollow noreferrer noopener"> x4XX set for scheduled reboot in Extreme Management Center does not work</A> Thu, 06 Oct 2016 01:11:00 GMT Mike_Thomas 2016-10-06T01:11:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/using-oneview-to-upgrade-xos-on-switch-don-t-reboot/m-p/31545#M3304 Using OneView 7.0.5.12 to upgrade the XOS on a X450e-24p switch and it downloads to the switch and installs but the switch never reboots to use the new image. I have "Reset device after upgrade" checked assuming this is the reboot function. <BR /> <BR /> Thu, 06 Oct 2016 01:03:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/using-oneview-to-upgrade-xos-on-switch-don-t-reboot/m-p/31545#M3304 DH1 2016-10-06T01:03:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/using-oneview-to-upgrade-xos-on-switch-don-t-reboot/m-p/31546#M3305 DH,<BR /> We have found this issue on a customer site as well.<BR /> Please open up a case with the GTAC under NMS for now.<BR /> <BR /> See article below - <BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/Solution/x4XX-set-for-scheduled-reboot-in-Extreme-Management-Center-does-not-work" target="_blank" rel="nofollow noreferrer noopener"> x4XX set for scheduled reboot in Extreme Management Center does not work</A> Thu, 06 Oct 2016 01:11:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/using-oneview-to-upgrade-xos-on-switch-don-t-reboot/m-p/31546#M3305 Mike_Thomas 2016-10-06T01:11:00Z