topic Right MIB in NetSight for querying CISCO's vlans in ExtremeCloud IQ- Site Engine Management Center

Right MIB in NetSight for querying CISCO's vlans

Ilya_Semenov — Thu, 14 Apr 2016 17:28:00 GMT

Hello, everybody!

I have a task to get vlans from cisco switches using Netsight. Local Extreme's engineer told me, that it is possible using MIT tools&Flexview.

Could you please explain me how to reach the goal?

I post a picture just to show where I am at a deadlock(((

Many thanks in advance,

ILya

RE: Right MIB in NetSight for querying CISCO's vlans

Mike_D — Fri, 15 Apr 2016 02:03:00 GMT

Hello Ilya,\

Try getnext on this table:

dot1qVlan=1.3.6.1.2.1.17.7.1.4

Regards,
Mike

RE: Right MIB in NetSight for querying CISCO's vlans

Kawawa — Fri, 15 Apr 2016 18:27:00 GMT

Hi Ilya,

Netsight has a FlexView for Cisco VLANs. If you open the FlexView Database, and navigate to VLAN, there's a CiscoVLAN.tpl FlexView.

And while it returns mostly interface information, If you select Properties from the menu I showed in the first screenshot, you can edit it and add your own OIDs like Mike previously mentioned, OR, you could create an entirely new FlexView

I hope is what you're asking to do.

All the best!

RE: Right MIB in NetSight for querying CISCO's vlans

Ilya_Semenov — Tue, 19 Apr 2016 02:41:00 GMT

Hello, gentlemen!

I'll try to do it soon and share my results. Many thanks to you!

RE: Right MIB in NetSight for querying CISCO's vlans

Ilya_Semenov — Wed, 27 Apr 2016 14:04:00 GMT

I've checked Kawawa's recommendation and it works perfectly well. Thank you very much!

RE: Right MIB in NetSight for querying CISCO's vlans

Drew_C — Wed, 27 Apr 2016 14:04:00 GMT

Thanks for coming back to confirm!

RE: Right MIB in NetSight for querying CISCO's vlans

Mike_D — Wed, 27 Apr 2016 17:17:00 GMT

Another well documented Q and A from the Hub community wraps up with a happy ending.
Pictures, clarification, results. I like this place!

Thanks for the follow up Ilya.
This info is sure to be useful to future customers.

Mike