SNMPv3 Adding New EXOS Switch to NETSIGHT via Script snmpassist

Grzegorz_Niemi1 — Fri, 20 Oct 2017 19:18:00 GMT

Hi All.

I’m in a process of fisrt configuration of netsight. I wish to add XOS switch (X440-g2) to netsight by using script snmpassist. Unfortunately there is no connection over SNMP. There is connection through CLI from netsight to the switch. I was even able to add NMS and NAC by using default snmpv3 settings. I wish to use different profile for switches just to learn how to do that.

Here are screens from NMS:

AND the switch:

SWITCH

SNMP configuration has been deleted.

* X440G2-24t-10G4.40 # run script snmpassist

Would you like to (D)elete or (C)onfigure SNMPv3? c

Please enter your SNMPv3 User name: snmpuser

Please enter your SNMPv3 User password (8 to 49 char): snmpuserpassword

Please enter your SNMPv3 privacy password (8 to 49 char): snmpuserpassword

Please enter your authentication type (SHA/MD5): md5

Please enter your encryption type (3DES, AES, DES, HEX): des

SNMP Group name is used to link multiple SNMP users together. Its not something that Netsight/ExtremeControl asks for.

Please enter your SNMPv3 Group name: snmpusergroup

Please enter your SNMPv3 Access preferences: TEST

Would you like to disable SNMP v1v2c access? (y/n): y

Would you like to disable the default SNMPv3 user? (y/n): y

Would you like to disable the default SNMPv3 group? (y/n): y

SNMPv3 configuration has been completed

* X440G2-24t-10G4.40 # show snmpv3 counters

snmpUnknownSecurityModels : 0

snmpInvalidMessages : 0

snmpUnknownPDUHandlers : 0

usmStatsUnsupportedSecLevels : 0

usmStatsNotInTimeWindows : 0

usmStatsUnknownUserNames : 2

usmStatsUnknownEngineIDs : 40

usmStatsWrongDigests : 14

usmStatsDecryptionErrors : 0

SWITCH

PS. I wasn’t able to add that switch to the nms even by using standard commands.

Please advise.

Best Regards

RE: SNMPv3 Adding New EXOS Switch to NETSIGHT via Script snmpassist

Jeremy_Gibbs — Fri, 20 Oct 2017 21:39:00 GMT

Just setup SNMPv3 by hand.

configure snmpv3 add user SNMPUSERNAME authentication md5 PASSWORD privacy PASSWORD
configure snmpv3 add group GROUPNAME user SNMPUSERNAME sec-model usm
configure snmpv3 add access GROUPNAME sec-model usm sec-level priv read-view defaultAdminView write-view defaultAdminView notify-view defaultNotifyView

RE: SNMPv3 Adding New EXOS Switch to NETSIGHT via Script snmpassist

Grzegorz_Niemi1 — Fri, 20 Oct 2017 21:39:00 GMT

Thank you Jeremy. It worked, the way you said. I will try anyway, to work it out with the script.

Best Regards

topic SNMPv3 Adding New EXOS Switch to NETSIGHT via Script snmpassist in ExtremeCloud IQ- Site Engine Management Center

SNMPv3 Adding New EXOS Switch to NETSIGHT via Script snmpassist

RE: SNMPv3 Adding New EXOS Switch to NETSIGHT via Script snmpassist

RE: SNMPv3 Adding New EXOS Switch to NETSIGHT via Script snmpassist