topic OneView Report - Profile vs. Location Bandwidth in ExtremeCloud IQ- Site Engine Management Center

OneView Report - Profile vs. Location Bandwidth

Francois_Scheun — Thu, 22 Oct 2015 19:28:00 GMT

Hi Guys

We're analyzing Purview application reports in OneView and have a question or two on the numbers seen.

1. Is there any relation between Top Location and Top Profile bandwidth consumption in OneView? The Purview location is based on IP subnet and NAC profile assigned by SSID.
2. If any relation. We're expecting these number to be the same or at least very similar. Would this be an accurate assumption?
3. Why is some traffic matched in the Location and not the Profile? We're expecting to see all flows match location and profile following authentication.

Please refer to below screenshot as illustration.

You're inputs will be greatly appreciated.

Kind Regards,
Francois Scheün

RE: OneView Report - Profile vs. Location Bandwidth

Ronald_Dvorak — Thu, 22 Oct 2015 20:40:00 GMT

Hi Francois,

is that a custom report or how could I get to this view.
There are sooo many options ... I'm sure I've only seen 50% of the available views...

Thanks,
Ron

RE: OneView Report - Profile vs. Location Bandwidth

Mike_Thomas — Mon, 26 Oct 2015 17:55:00 GMT

Francios,
I am not sure if this will explain some of your results.
https://gtacknowledge.extremenetworks.com/articles/Q_A/Why-are-there-no-clients-in-Purview-reports-f...