https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/2-nics-on-netsight-server/m-p/33726#M3690 I have netsight 6.2 installed on VM with 2 nics, 1 on server network and 1 on mgmt. network.<BR /> Is there a config file I can edit to allow admin access to console /inventory mgr on one nics and switch archives tftp traffic over the other MGMT nics?<BR /> Sat, 15 Aug 2015 00:12:00 GMT GCIT_Support 2015-08-15T00:12:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/2-nics-on-netsight-server/m-p/33726#M3690 I have netsight 6.2 installed on VM with 2 nics, 1 on server network and 1 on mgmt. network.<BR /> Is there a config file I can edit to allow admin access to console /inventory mgr on one nics and switch archives tftp traffic over the other MGMT nics?<BR /> Sat, 15 Aug 2015 00:12:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/2-nics-on-netsight-server/m-p/33726#M3690 GCIT_Support 2015-08-15T00:12:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/2-nics-on-netsight-server/m-p/33727#M3691 No, they can be used to manage and connect to devices on both. If both are used. In this case you must make sure that it binds correctly to just one of the NICS.<BR /> <BR /> Please review the following.<BR /> <A href="https://gtacknowledge.extremenetworks.com/articles/How_To/NMS-Configuring-Multple-Interfaces" target="_blank" rel="nofollow noreferrer noopener">https://gtacknowledge.extremenetworks.com/articles/How_To/NMS-Configuring-Multple-Interfaces</A><BR /> Sat, 15 Aug 2015 00:40:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/2-nics-on-netsight-server/m-p/33727#M3691 Mike_Thomas 2015-08-15T00:40:00Z