topic script on C5 in ExtremeCloud IQ- Site Engine Management Center

script on C5

giro — Mon, 13 Apr 2015 17:59:00 GMT

Hi all.
Is it possible on a C5 to write a script (or is available a feature on it) that gets down an Eth interface if it feels another Eth interface has gone down and viceversa?

Example:
I want port 1 to go down if port 19 has gone down.
I want port 1 to go up if port 19 hos gone up.

RE: script on C5

giro — Tue, 14 Apr 2015 13:14:00 GMT

any suggestion??

RE: script on C5

Andre_K_ — Tue, 14 Apr 2015 14:20:00 GMT

Well. If you own the Netsight software you could create a custom alarm for the "port 19 down" snmp trap. This alarm could be configured to execute a script whenever the specified trap is received by Netsight. For script based switch configuration Enterasys had a little tool suite called "ATG Tools". That would allow to create a simple script to disable port 1. However I am currently unable to find a download source for said ATG Tools. I suppose they are discontinued!?

RE: script on C5

giro — Wed, 15 Apr 2015 22:06:00 GMT

I think ATG tools is no longer available and I didn't buy Netsight this time so I think I can't write any script on my C5...

RE: script on C5

Naoman_Ghani — Thu, 16 Apr 2015 02:48:00 GMT

A lot more scripting work but you could use...
http://linux.die.net/man/5/snmptrapd.conf

To trap "port 19 down" and call a shell script that telnet/ssh-ed to the switch to change port 1.