Customize Device List Tree in Console

Chris_Yereaztia — Wed, 22 Feb 2017 15:49:00 GMT

Hello Everyone

We are in the process of migrating from Ridgeline to Netsight and one request an engineer made was that the List of Devices in the DeviceTree should show the system Name of the Switch and the IP address instead of just the IP address.

His remark was that in Ridgeline the Device-Name and the IP address of the device was shown in the device list. However in Netsight you can choose between: the IP Address or the SysName. You can have either but not both together (See Screenshot)

Device List can show the sysName (or the default: ip address)

I noticed that only the following options are available in the preferences

Is there any way to customize this setting for example Use System Name and the IP Address. I noticed that whenever I change the setting the following file is modified:

C:\Users\\AppData\Roaming\NetSight\Console\Options\DataDisplayOptions.properties

The property is either set to systemName or ip

DataDisplayOptions.deviceDisplayNameFormat=systemName

or

DataDisplayOptions.deviceDisplayNameFormat=ip

Is there an option like systemName + ip which would show both?

Best Regards
Chris

RE: Customize Device List Tree in Console

Bharathiraja__S — Wed, 22 Feb 2017 16:05:00 GMT

Hi Chris,

can you share the netsight version ?

Thanks,
Suresh.B

RE: Customize Device List Tree in Console

Chris_Yereaztia — Wed, 22 Feb 2017 16:19:00 GMT

We are running Netsight Version 7.0.9.4

RE: Customize Device List Tree in Console

Chris_Yereaztia — Tue, 09 May 2017 16:51:00 GMT

* BUMP *

Any updates on this one ?

topic RE: Customize Device List Tree in Console in ExtremeCloud IQ- Site Engine Management Center

Customize Device List Tree in Console

RE: Customize Device List Tree in Console

RE: Customize Device List Tree in Console

RE: Customize Device List Tree in Console