topic how to add port groups to Eaps Domain in Netsight ? in ExtremeCloud IQ- Site Engine Management Center

how to add port groups to Eaps Domain in Netsight ?

Tiburcio_Jr_Cor — Wed, 03 Feb 2016 23:19:00 GMT

In Ridgeline you would create port groups and associate those port groups to a defined Eaps Domain and run a script to add a new vlan to those ports. How would you perform this in Netsight 6.3 ?

RE: how to add port groups to Eaps Domain in Netsight ?

Tony_Thornton — Wed, 03 Feb 2016 23:40:00 GMT

Hi Tiburicio,

This related conversation may be helfpul:

https://community.extremenetworks.com/extreme/topics/easiest-way-to-add-a-eaps-protected-vlan-with-n...

You can add ring ports to EAPS rings along with other actions.

Tony

RE: how to add port groups to Eaps Domain in Netsight ?

Tiburcio_Jr_Cor — Wed, 03 Feb 2016 23:49:00 GMT

I have tried this and does not work for me, it creates the vlan and tags it, it fails when ithe script tries to add to the ports have selected in the Eaps script

RE: how to add port groups to Eaps Domain in Netsight ?

Tiburcio_Jr_Cor — Wed, 03 Feb 2016 23:50:00 GMT

In Ridgeline you would create port groups, from there you would sync which eaps script you wan to add to those port groups.

RE: how to add port groups to Eaps Domain in Netsight ?

Tony_Thornton — Wed, 03 Feb 2016 23:59:00 GMT

Are there any messages from the script wizard corresponding to when it fails indicating why it failed? Any messages in the switch log created when the script is run?

RE: how to add port groups to Eaps Domain in Netsight ?

Tiburcio_Jr_Cor — Wed, 03 Feb 2016 23:59:00 GMT

it just says it could not add the ports to the corresponding switches, i can send you some snap shots ?

RE: how to add port groups to Eaps Domain in Netsight ?

Tiburcio_Jr_Cor — Wed, 03 Feb 2016 23:59:00 GMT

a total of 3 switches and 6 ports

RE: how to add port groups to Eaps Domain in Netsight ?

Tony_Thornton — Wed, 03 Feb 2016 23:59:00 GMT

You can upload an image to a post using the icon that looks like a camera when typing your post.
Were there any messages in the switch log indicating a problem as the script ran? If there are some, please post the output of those messages too.

RE: how to add port groups to Eaps Domain in Netsight ?

Tiburcio_Jr_Cor — Wed, 03 Feb 2016 23:59:00 GMT

My script on NetSight

#@MetaDataStart

#############################################################################################

# Define your user parameters in this section. For reference, see EPICenter bundled scripts.

#############################################################################################

#@VariableFieldLabel (description = "VLAN Name",

# type = String,

# scope = global,

# required = yes

# )

set var vlanname ""

##############################################################################################

#@VariableFieldLabel (description = "VLAN Tag", type = String,

# scope = global,

# required = yes

# )

set var vlannametag ""

#@MetaDataEnd

# Enter all CLI commands from here

create vlan $vlanname

config vlan $vlanname tag $vlannametag

disable igmp snooping vlan $vlanname

config eaps burke_commerce add protected $vlanname

config $vlanname add port $port tagged

regexp {.*Adding EAPS ring ports to a VLAN could cause a loop.*} ${CLI.OUT} foundit

IF ([info exists foundit]) THEN

CLI y

ENDIF

RE: how to add port groups to Eaps Domain in Netsight ?

Tiburcio_Jr_Cor — Wed, 03 Feb 2016 23:59:00 GMT

RE: how to add port groups to Eaps Domain in Netsight ?

Tony_Thornton — Wed, 03 Feb 2016 23:59:00 GMT

Thank you for the information. Are ports 1:6 and 2:6 already members of vlan 'burke_commerce'? If they are not, they need to be added to the vlan. If you have not already done so, these same ports need to be added to the EAPS control vlan too.

RE: how to add port groups to Eaps Domain in Netsight ?

Tiburcio_Jr_Cor — Wed, 03 Feb 2016 23:59:00 GMT

they are members of the Eaps Ports

RE: how to add port groups to Eaps Domain in Netsight ?

Tiburcio_Jr_Cor — Wed, 03 Feb 2016 23:59:00 GMT

yes

RE: how to add port groups to Eaps Domain in Netsight ?

Tiburcio_Jr_Cor — Wed, 03 Feb 2016 23:59:00 GMT

correct, they are already a part of the control vlan, when i run the script in Ridgeline it performs normal. In NetSight it does not

RE: how to add port groups to Eaps Domain in Netsight ?

Tony_Thornton — Wed, 03 Feb 2016 23:59:00 GMT

Sorry, my mistake, are ports 1:6 and 2:6 need to be members of vlan piw_inet_test_burke2_1014? They need to be. burke_commerce is the EAPS domain.

RE: how to add port groups to Eaps Domain in Netsight ?

Tony_Thornton — Wed, 03 Feb 2016 23:59:00 GMT

Ooops hit 'send' before I proofread my reply. Those ports need to be members of vlan 'piw_Inet_test_burke2_1014'.

RE: how to add port groups to Eaps Domain in Netsight ?

Tiburcio_Jr_Cor — Wed, 03 Feb 2016 23:59:00 GMT

I have opened a GTAC case. Netsight is not pulling in port information from Port Element groups.

RE: how to add port groups to Eaps Domain in Netsight ?

Tiburcio_Jr_Cor — Wed, 03 Feb 2016 23:59:00 GMT

I have opened a GTAC case. Netsight is not pulling in port information from Port Element groups.

RE: how to add port groups to Eaps Domain in Netsight ?

Tony_Thornton — Wed, 03 Feb 2016 23:59:00 GMT

Ok, thanks for the update. I think you'll get this solved in no time with GTAC's help!
Have a good day