topic RE: Access point's ip's different in netsight in ExtremeCloud IQ- Site Engine Management Center

Access point's ip's different in netsight

juan_romero — Thu, 23 Jun 2016 02:32:00 GMT

HI, I have an AP with static ip address 10.1.5.2 but in netsight I see the same AP with a different ip address 10.1.5.15. (same mac address and name of the AP) The question is: how can I do to have the same information in both wireless controller and netsight?

RE: Access point's ip's different in netsight

Rajesh_Chaubey — Thu, 23 Jun 2016 10:24:00 GMT

Hi Juan,

Is it possible to share the static ip configuration of access point from WLC web-gui.

Thanks

RE: Access point's ip's different in netsight

Mike_Thomas — Thu, 23 Jun 2016 16:50:00 GMT

Screen shots of what you are looking at would provide better guidance for your problem. If it is a public IP then use a tool to gray out part of the IP address.

RE: Access point's ip's different in netsight

juan_romero — Thu, 23 Jun 2016 23:28:00 GMT

Thank you, these are the sreen shots for INAH_AP_PISO_1-1 WLC and NETSIGHT

RE: Access point's ip's different in netsight

dflouret — Fri, 24 Jun 2016 17:00:00 GMT

Juan,

In your screenshots of the WLC the AP is configured to use DHCP and not the IP address configured there. That's why it shows 172.16.101.15 instead of 172.16.101.106...

If you want the AP to use the configured value, select Static Values instead of Use DHCP in the WLC screen.

Saludos, Daniel

RE: Access point's ip's different in netsight

Ronald_Dvorak — Fri, 24 Jun 2016 17:15:00 GMT

If the AP is set to DHCP and the AP is connected to the controller the greyed out static IP Address field will show the IP that was discovered by DHCP.
So in case the AP has a up&running CAPWAP then this IP should be equal to the one that is presented in Netsight.

@Juan - could you point me to the Netsight view, mine looks different so I wonder whether I'm in another window.
What license is installed ... base or advanced
Could you post a screenshot of the AP view in OneView/Extreme Control Center - I'd like to see whether the AP is green/active in the view.

RE: Access point's ip's different in netsight

juan_romero — Fri, 24 Jun 2016 17:15:00 GMT

The license is basic. Here is the main menu of one view, I can not see the option you mention.

RE: Access point's ip's different in netsight

juan_romero — Fri, 24 Jun 2016 19:45:00 GMT

So sorry, I misunderstood the parameter "Ip Address Assignement" I thought it was the way AP assigns IPs to the devices connected to it. :s

Thank you very much for your help.