https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/xmc-device-type-visibility/m-p/36295#M4189 Hi Andre,<BR /> <BR /> as far I know..yes the Controller can do it by him self without the XMC.<BR /> But depends on the code both are using the same database for the OUI .<BR /> <BR /> "Device was misidentified in dhcp option 55. ( DHCP signature or MAC address's OUI)."<BR /> <BR /> Regards<BR /> Umut Aydin<BR /> <BR /> Tue, 13 Mar 2018 18:56:00 GMT Umut_Aydin 2018-03-13T18:56:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/xmc-device-type-visibility/m-p/36294#M4188 Hi Community.<BR /> <BR /> With the Version 10 of the Identify wireless firmware, it identifies device types, without the need for NAC.<BR /> Can XMC report on the device types ect without NAC, reading this information from the wireless controller? Mon, 26 Feb 2018 15:59:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/xmc-device-type-visibility/m-p/36294#M4188 Andre_Brits_Kan 2018-02-26T15:59:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/xmc-device-type-visibility/m-p/36295#M4189 Hi Andre,<BR /> <BR /> as far I know..yes the Controller can do it by him self without the XMC.<BR /> But depends on the code both are using the same database for the OUI .<BR /> <BR /> "Device was misidentified in dhcp option 55. ( DHCP signature or MAC address's OUI)."<BR /> <BR /> Regards<BR /> Umut Aydin<BR /> <BR /> Tue, 13 Mar 2018 18:56:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/xmc-device-type-visibility/m-p/36295#M4189 Umut_Aydin 2018-03-13T18:56:00Z