topic RE: Map only rights in Oneview in ExtremeCloud IQ- Site Engine Management Center

Map only rights in Oneview

DH1 — Fri, 22 Dec 2017 00:07:00 GMT

My director has asked to view the maps in Oneview and I don't want to give him admin rights to do so. I have created a new group and went through the capabilities in the group but cannot figure it out. Any ideas?

RE: Map only rights in Oneview

Bharathiraja__S — Mon, 25 Dec 2017 11:37:00 GMT

Hi

First create a user group with list of capabilities which you want to allow for this user group then create a user account and map the user group.

Please follow below steps to create user account in netsight.

Choose the Administration tab
Choose the Users tab
Under Authorized Users click Add
Type name into the User name pop up and select the Authorization group
Click OK
New user name appears in the Authorized Users list

Thanks,
Suresh.B

RE: Map only rights in Oneview

Bharathiraja__S — Mon, 25 Dec 2017 14:54:00 GMT

Hi ,

Please find the screen shorts for permission levels availables in Netsight also it has sub capabilities to select for user permission.

Thanks,
Suresh.B

RE: Map only rights in Oneview

Ronald_Dvorak — Thu, 28 Dec 2017 17:00:00 GMT

From a short test it looks like that you'd need to enable the following to get access to the maps...

RE: Map only rights in Oneview

Bharathiraja__S — Sat, 30 Dec 2017 07:50:00 GMT

Hi,

Please check and let us know if you have any further questions.

Thanks,

Suresh.B

RE: Map only rights in Oneview

DH1 — Sat, 06 Jan 2018 03:47:00 GMT

I was able to go through the checklist and select only the ones that gave him rights to the maps. Thanks for your help!