topic RE: One view Scripting - Cisco in ExtremeCloud IQ- Site Engine Management Center

One view Scripting - Cisco

Tony_Rallo — Tue, 19 Jan 2016 20:55:00 GMT

Hi,

To my Customers, I install Extreme NAC solution. To deploy Authentication Globally and Ports on switches, i use differents scripts in One View. It works fine with EOS and EXOS but many customers have Cisco architecture.

I can configure Authentication on Cisco switches with SSH/telnet, it works fine too. I want to use a script to deploy Authentication configuration with One View ? is it possible ?

Tony R.

RE: One view Scripting - Cisco

Mike_D — Fri, 22 Jan 2016 22:24:00 GMT

Hello Tony,

The utility allows configuration of any device via the access/interfacing methods you mentioned. Working with a script for Cisco will be more complex than scripting Extreme switches as you'll need to define arguments/terms etc from the ground up - but it's do-able.

Regards,

Mike

RE: One view Scripting - Cisco

daniel_griffis — Thu, 27 Jul 2017 05:27:00 GMT

Have you had any luck with this

RE: One view Scripting - Cisco

Michal_Andryszc — Tue, 01 Aug 2017 18:34:00 GMT

Hello, can you provide some more info how to prepare OneView scripting to work with other vendors (for example Cisco)?

Scritps on other vendors devices from NetSight Console work perfect but from OneView do not work at all.

In OneView Run Scrpt window I got: "Failed to connect to device communicator session".

In server.log file:
"Scripting prompts for vendor:HP not found, Loading basic prompt detection."

Thanks in advance.