topic RE: learned mac address refer to group in ExtremeCloud IQ- Site Engine Management Center

learned mac address refer to group

Visconti — Tue, 25 Sep 2018 14:04:00 GMT

I have created a DEVICE GROUP with ITS INTERNAL only two port/pc so I STARTED the flexview "learned mac addresses" to know if the 2 pc are turned on but my view show nothing.

RE: learned mac address refer to group

Ronald_Dvorak — Tue, 25 Sep 2018 16:43:00 GMT

Did you click on the green play button icon in the upper right corner of this screen to start the query ?!

RE: learned mac address refer to group

Visconti — Tue, 25 Sep 2018 17:11:00 GMT

Yes absolutely!

RE: learned mac address refer to group

Ronald_Dvorak — Tue, 25 Sep 2018 17:20:00 GMT

Does it work if you run it on the whole switch isntead of an port group ?

RE: learned mac address refer to group

Visconti — Tue, 25 Sep 2018 17:54:00 GMT

YES ! but I need to show only the computers in that group
otherwise what is the purpose of creating groups?

RE: learned mac address refer to group

Ronald_Dvorak — Tue, 25 Sep 2018 17:54:00 GMT

Calm down... I only wanted to make sure that it works in general before adding a device group.

RE: learned mac address refer to group

Visconti — Tue, 25 Sep 2018 17:54:00 GMT

Sorry  I am calm with you ..... I am less calm with Netsight !!

RE: learned mac address refer to group

Ronald_Dvorak — Tue, 25 Sep 2018 17:54:00 GMT

I get the same result..... I'd open a GTAC ticket as I'm not sure whether that will work with this flexview.

RE: learned mac address refer to group

Visconti — Tue, 25 Sep 2018 17:54:00 GMT

I'm afraid so 😞