topic RE: How to Configure Netsight Dashboard ? in ExtremeCloud IQ- Site Engine Management Center

How to Configure Netsight Dashboard ?

Silva1 — Fri, 14 Oct 2016 13:50:00 GMT

Hello guys !

I just recently started with netsight , and i have seen some very com display with graphics , dashboards , showing features from the switches performances , here att office we have a big screen and i would love to be able to activate those graphics in netsight , i can see under the reports tab that i can choose dashboard , but they all show blank with no information !
What do i have to do to aktivate this ?

Txh for your time in advance !

RE: How to Configure Netsight Dashboard ?

davidj_cogliane — Fri, 04 Nov 2016 00:44:00 GMT

Silva,

Are the completely bank or do they just now show data?

RE: How to Configure Netsight Dashboard ?

Jeremy_Gibbs — Sat, 05 Nov 2016 00:39:00 GMT

Do you have any devices added into NetSight? I would suggest using only SNMPv3 for Extreme/Enterasys devices. Once you have devices added, you should be able to right click on the device from OneView and select "Collect performance data etc....".

RE: How to Configure Netsight Dashboard ?

Bin — Wed, 09 Nov 2016 14:07:00 GMT

Hello Silva.

If you want to know how to add the device into Netsight though SNMPv3, you could reference the following link as the example.
http://enjoynetworkscommunication.blogspot.jp/2016/11/extremewireless-byod-lab-3.html

RE: How to Configure Netsight Dashboard ?

Bob_Maheu — Wed, 09 Nov 2016 23:28:00 GMT

Hello,

You can following the information in the following KCS article to collect stats for OneView/Extreme Management Center. The dashboards should then populate after a short time:

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-setup-interface-and-device-statisti...

RE: How to Configure Netsight Dashboard ?

Ronald_Dvorak — Thu, 10 Nov 2016 17:34:00 GMT

We should might start with the software version that you've installed and which license is enabled.