https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/ssh-to-exos-switch-using-any-port-available/m-p/42347#M5452 As long as the port is assigned to a VLAN with an IP address, you can use it to access the CLI over SSH.<BR /> On models that support user-created VRs, you can assign them to a given Virtual Router. The necessity of doing that could be debated though.<BR /> Mon, 18 Jun 2018 19:53:00 GMT Drew_C 2018-06-18T19:53:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/ssh-to-exos-switch-using-any-port-available/m-p/42346#M5451 I can access the switch via ssh through the Mgmt port. Fine. But what I need to know is how can I access the switch via SSH through any of the front ports, 1 to 48. And is there a way to create different Virtual Routers for each vlan. Mon, 18 Jun 2018 18:52:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/ssh-to-exos-switch-using-any-port-available/m-p/42346#M5451 Lazaro_Carrillo 2018-06-18T18:52:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/ssh-to-exos-switch-using-any-port-available/m-p/42347#M5452 As long as the port is assigned to a VLAN with an IP address, you can use it to access the CLI over SSH.<BR /> On models that support user-created VRs, you can assign them to a given Virtual Router. The necessity of doing that could be debated though.<BR /> Mon, 18 Jun 2018 19:53:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/ssh-to-exos-switch-using-any-port-available/m-p/42347#M5452 Drew_C 2018-06-18T19:53:00Z