topic RE: Netsight alarm ip-security in ExtremeCloud IQ- Site Engine Management Center

Netsight alarm ip-security

JohanHendrikx — Thu, 18 Jun 2015 12:54:00 GMT

I configured on a switch ip-security DHCP-snooping. I also created an alarm in Netsight.

When I receive an alarm, the information is:

IP Security Violation VLAN ifIndex INTEGER: 19 VLAN Description STRING: VLAN-NAME Port ifIndex IP MAC Violation Type .

How can I get the information ?

RE: Netsight alarm ip-security

Mike_Thomas — Fri, 19 Jun 2015 17:40:00 GMT

Johan, what product and fimrware are you working with sending that alarm?

RE: Netsight alarm ip-security

JohanHendrikx — Fri, 19 Jun 2015 18:20:00 GMT

I've tested it with netsight 6.2.0.211. The switch that send the alarm is a x250-24p with firmware 15.3.1.4 patch1-44

RE: Netsight alarm ip-security

Mike_Thomas — Fri, 19 Jun 2015 19:52:00 GMT

Johan, the means that the product is not sending in any data for those parameters. We looked at the security template in netsight, and it appears to be correctly for receiving said traps.
So this does not appear to be a formatting issue. I have added the XOS category into the discussion. Maybe they can assist with some recommendations.

RE: Netsight alarm ip-security

Mike_Thomas — Wed, 24 Jun 2015 23:01:00 GMT

Johan, after further review and re-creation we have opened up a case for you regarding this, and will follow up with that. Let me know if you do not see that case.

RE: Netsight alarm ip-security

Annas_Shaker — Fri, 10 Jul 2015 01:45:00 GMT

Johan, here is a link for an article in our knowledge base that references this issue:
https://gtacknowledge.extremenetworks.com/articles/Solution/NetSight-IP-Security-Alarms-Show-UNKNOWN...