topic RE: How to backup Enterasys S4 S-Series with netsight Inventory Manager in ExtremeCloud IQ- Site Engine Management Center

How to backup Enterasys S4 S-Series with netsight Inventory Manager

Alexandre_Lima — Tue, 27 Sep 2016 23:01:00 GMT

I already configure the Inventory Manager to make backup of the switch S4, but the inventory manager show follow error "Device reported, operation failed". How can I handle this issue?

Netsight 6.1.0.171
Core Switch S4

RE: How to backup Enterasys S4 S-Series with netsight Inventory Manager

Ryan_Yacobucci — Tue, 27 Sep 2016 23:32:00 GMT

Hello,

Check this article out:

https://gtacknowledge.extremenetworks.com/articles/Solution/Inventory-Manager-config-backup-failing-...

Can you confirm there is no firewall between the S4 and the NetSight server?

Thanks
-Ryan

RE: How to backup Enterasys S4 S-Series with netsight Inventory Manager

Alexandre_Lima — Wed, 28 Sep 2016 01:56:00 GMT

There isn't any firewall between the S4 and the Netsight server. The other switchs in the network make backup normally. The windows firewall is off.

RE: How to backup Enterasys S4 S-Series with netsight Inventory Manager

Ryan_Yacobucci — Wed, 28 Sep 2016 02:03:00 GMT

Can you verify the S Series management interface has connectivity to NetSight?

Also, can you verify the NetSight has read/write SNMP access to the S Series?

Thanks
-Ryan

RE: How to backup Enterasys S4 S-Series with netsight Inventory Manager

Bastian_Sprotte — Wed, 28 Sep 2016 14:29:00 GMT

Hello,
please review if you have set the S-Series management interface

https://gtacknowledge.extremenetworks.com/articles/How_To/Configuration-management-interface-S-Serie...

RE: How to backup Enterasys S4 S-Series with netsight Inventory Manager

Alexandre_Lima — Thu, 29 Sep 2016 19:10:00 GMT

The management interface is already configured. I think that the cause of the problem is because the NetSight is in the version 6.1.0.171. How can i make backup and upgrade to version 6.3.0.182? Ara there some configuration to do before the installation?

RE: How to backup Enterasys S4 S-Series with netsight Inventory Manager

Bastian_Sprotte — Fri, 30 Sep 2016 12:42:00 GMT

6.1 should be able to build an inventory from S-Series,
-you should check at first if the S-Series get all instruction from NMS.

on the S-Series cli you see such event if you make an Inventory / Stamp New Version ,,

set logging here enable
set logging default severity 7
set logging application Security level 7

<166>Sep 30 09:25:45 10.131.213.254 Security[1]User:public; Source:10.131.213.12; Action:"etsysConfigMgmtChangeRowStatus.1 = 5"; Status:OK
<166>Sep 30 09:25:45 10.131.213.254 Security[1]User:public; Source:10.131.213.12; Action:"etsysConfigMgmtChangeOperation.1 = 04:00"; Status:OK
<166>Sep 30 09:25:45 10.131.213.254 Security[1]User:public; Source:10.131.213.12; Action:"etsysConfigMgmtChangeURL.1 = tftp://10.131.213.12/configs/tmp/10_131_213_254.cfg"; Status:OK
<166>Sep 30 09:25:45 10.131.213.254 Security[1]User:public; Source:10.131.213.12; Action:"etsysConfigMgmtChangeDelayTime.1 = 0"; Status:OK
<166>Sep 30 09:25:45 10.131.213.254 Security[1]User:public; Source:10.131.213.12; Action:"etsysConfigMgmtChangeRowStatus.1 = 1"; Status:OK
<166>Sep 30 09:26:05 10.131.213.254 Security[1]User:public; Source:10.131.213.12; Action:"etsysConfigMgmtChangeRowStatus.1 = 6"; Status:OK

If you see this event, good,
now the TFTP server needs to be checked,

regards
Bastian
-

RE: How to backup Enterasys S4 S-Series with netsight Inventory Manager

Ryan_Yacobucci — Tue, 18 Oct 2016 19:50:00 GMT

Hello,

Have you been able to successfully backup the S series?

Thanks
-Ryan

RE: How to backup Enterasys S4 S-Series with netsight Inventory Manager

Alexandre_Lima — Thu, 20 Oct 2016 00:24:00 GMT

Hello,
Thank you, guys for your help, but I no longer give support to this applaince and solution. I can't test that commands and I couldn't find the solution for this issue.

Thank you, again.