Netsight doesn't create a link on the map with IBM PureFlex

Ilya_Semenov — Tue, 31 Jan 2017 15:29:00 GMT

Hello, everybody!

I have added an IBM Pureflex EN4093 switch to Netsight 7.0.3 over SNMP. I can see Model, version, and many others SNMP's IDs, but I can't see link between my Extremes and Pureflexes in Oneview (in Maps). I have got links between Extremes and CISCOs, but there is a problem with IBM Pureflex.

The Pureflex is connected to X670 stack. LLDP is turned on on both sides. From X670 I see the following info about Pureflex:

LLDP Port 3:20 detected 1 neighbor Neighbor: A8:97:DC:5E:55:00/46, age 20 seconds

- Chassis ID type: MAC address (4)

Chassis ID : A8:97:DC:5E:55:00

- Port ID type: Locally assigned (7)

Port ID : "46"

- Time To Live: 120 seconds

- Port Description: "EXT4"

- System Name: "PF1-SW1"

- System Description: "IBM Flex System Fabric EN4093R 10Gb Scalable Switch, IBM Networking OS: version 7.8.5, Boot image: version 7.8.5"

- System Capabilities : "Bridge, Router"

Enabled Capabilities: "Bridge, Router"

- Management Address Subtype: IPv4 (1)

Management Address : 10.10.0.77

Interface Number Subtype : ifIndex (2)

Interface Number : 128

Object ID String : "null"

- IEEE802.1 Port VLAN Identifier: 1

- IEEE802.1 Port & Protocol VLAN

Capability/Status: Incapable, Enabled (0x02)

PPVID Reference : 1

- IEEE802.1 Port & Protocol VLAN

Capability/Status: Incapable, Enabled (0x02)

PPVID Reference : 250

- IEEE802.1 Port & Protocol VLAN

Capability/Status: Incapable, Enabled (0x02)

PPVID Reference : 9

- IEEE802.1 Port & Protocol VLAN

Capability/Status: Incapable, Enabled (0x02)

PPVID Reference : 10

- IEEE802.1 Port & Protocol VLAN

Capability/Status: Incapable, Enabled (0x02)

PPVID Reference : 11

- IEEE802.1 Port & Protocol VLAN

Capability/Status: Incapable, Enabled (0x02)

PPVID Reference : 13

- IEEE802.1 Port & Protocol VLAN

Capability/Status: Incapable, Enabled (0x02)

PPVID Reference : 7

- IEEE802.1 Port & Protocol VLAN

Capability/Status: Incapable, Enabled (0x02)

PPVID Reference : 12

- IEEE802.1 Port & Protocol VLAN

Capability/Status: Incapable, Enabled (0x02)

PPVID Reference : 14

- IEEE802.1 Port & Protocol VLAN

Capability/Status: Incapable, Enabled (0x02)

PPVID Reference : 251

- IEEE802.1 VLAN Name: "Default VLAN", VLAN ID: 1

- IEEE802.1 VLAN Name: "VLAN 250", VLAN ID: 250

- IEEE802.1 VLAN Name: "VLAN 9", VLAN ID: 9

- IEEE802.1 VLAN Name: "VLAN 10", VLAN ID: 10

- IEEE802.1 VLAN Name: "VLAN 11", VLAN ID: 11

- IEEE802.1 VLAN Name: "VLAN 13", VLAN ID: 13

- IEEE802.1 VLAN Name: "VLAN 7", VLAN ID: 7

- IEEE802.1 VLAN Name: "VLAN 12", VLAN ID: 12

- IEEE802.1 VLAN Name: "VLAN 14", VLAN ID: 14

- IEEE802.1 VLAN Name: "VLAN 251", VLAN ID: 251

- IEEE802.1 Protocol Identity: ""

- IEEE802.3 MAC/PHY Configuration/Status

Auto-negotiation : Not Supported (0x00)

Operational MAU Type : 10GigBaseSR (36)

- IEEE802.3 Power via MDI

Port Class : Powered Device (PD)

MDI Power Support : Not Supported

- IEEE802.3 Link-aggregation

Capability/Status : Capable, Enabled (0x03)

Aggregated Port ID: 65 (0x00000041)

- IEEE802.3 Maximum Frame Size: 1522 bytes

- Unknown organizational specific TLV: Length=7 bytes, OUI=0018B1

HEX Dump [000]: 00 18 B1 01 10 00 00

Here is my map:

Please, let me know how may I solve the issue?

Many thanks in advance, Ilya

RE: Netsight doesn't create a link on the map with IBM PureFlex

Jeremy_Gibbs — Tue, 31 Jan 2017 20:26:00 GMT

Right click and click "refresh (rediscover)". Sometimes that fixes it for me. But then again, I have never had a map with anything but Extreme equipment.

RE: Netsight doesn't create a link on the map with IBM PureFlex

Ilya_Semenov — Tue, 31 Jan 2017 21:32:00 GMT

Hello, Jeremy!

This is fun. I've tried. I've waited about 24 hours. Still nothing.

RE: Netsight doesn't create a link on the map with IBM PureFlex

Karthik_Mohando — Wed, 01 Feb 2017 20:08:00 GMT

Ilya, I lately noticed a similar issue where some device added to the maps sends LLDP chassis ID other than MAC address might bring similar situation (links will not be created) I believe this would be fixed in 8.0, To confirm if you are hitting the same issue can you try the steps mentioned in this article and see if you can find a non mac LLDP chassis ID? https://gtacknowledge.extremenetworks.com/articles/Solution/LLDP-EDP-Links-between-some-devices-are-not-seen-in-Maps

topic Netsight doesn't create a link on the map with IBM PureFlex in ExtremeCloud IQ- Site Engine Management Center

Netsight doesn't create a link on the map with IBM PureFlex

RE: Netsight doesn't create a link on the map with IBM PureFlex

RE: Netsight doesn't create a link on the map with IBM PureFlex

RE: Netsight doesn't create a link on the map with IBM PureFlex