https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/unable-to-get-policy-to-work-in-exos-16-1/m-p/44947#M6051 Hi Jarek,<BR /> <BR /> A few items that you will want to make sure are set properly.<BR /> <OL> <LI>Make sure that the device has authentication turned on for both the device and port </LI><LI>If the switch is using VR-Mgmt, that needs to be specified when adding it to NAC </LI><LI>If using MAC Authentication, the command 'configure netlogin add mac-list default' needs to be added so that all MAC authentication requests are sent to NAC.</LI></OL>Let me know if that helps at all.<BR /> <BR /> Thanks,<BR /> <BR /> Tyler Thu, 09 Jul 2015 22:33:00 GMT TylerMarcotte 2015-07-09T22:33:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/unable-to-get-policy-to-work-in-exos-16-1/m-p/44946#M6050 Do you tested it ? . When I have added to policy manager summit switch and enable 802.1x/MAC authentication on switch and on port. The NAC doesn't see end system. I must prepare special config on switch ? Note: This conversation was created from a <A href="http://community.extremenetworks.com/extreme/topics/exos-16-1-releases-with-new-hardware-and-role-based-policy-support/replies/15883334" target="_blank" rel="nofollow noreferrer noopener">reply</A> on: <A href="http://community.extremenetworks.com/extreme/topics/exos-16-1-releases-with-new-hardware-and-role-based-policy-support" target="_blank" rel="nofollow noreferrer noopener">EXOS 16.1 Releases with New Hardware and Role-based Policy Support!</A>. Thu, 09 Jul 2015 19:43:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/unable-to-get-policy-to-work-in-exos-16-1/m-p/44946#M6050 Jarek_Sobieszek 2015-07-09T19:43:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/unable-to-get-policy-to-work-in-exos-16-1/m-p/44947#M6051 Hi Jarek,<BR /> <BR /> A few items that you will want to make sure are set properly.<BR /> <OL> <LI>Make sure that the device has authentication turned on for both the device and port </LI><LI>If the switch is using VR-Mgmt, that needs to be specified when adding it to NAC </LI><LI>If using MAC Authentication, the command 'configure netlogin add mac-list default' needs to be added so that all MAC authentication requests are sent to NAC.</LI></OL>Let me know if that helps at all.<BR /> <BR /> Thanks,<BR /> <BR /> Tyler Thu, 09 Jul 2015 22:33:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/unable-to-get-policy-to-work-in-exos-16-1/m-p/44947#M6051 TylerMarcotte 2015-07-09T22:33:00Z