https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/netsight-ap-3630-not-completely-discovered/m-p/45427#M6158 Though a "thick mode" AP3630 (by design, not under a wireless controller) does support SNMPv3, its effectiveness is somewhat constrained by the minimal number of supported MIBs. This is what we received from a full MIB walk of a lab AP3630:<BR /> <UL> One of each: sysDescr, sysObjectID, sysUpTime, sysContact, sysName, sysLocation, sysServices One for each of three ports: ifIndex, ifDescr, ifAdminStatus, ifOperStatus One of each: etsysPolicyProfileMaxEntries, etsysPolicyProfileNumEntries, etsysPolicyProfileLastChange, etsysPolicyProfileTableNextAvailableIndex, etsysPolicyProfileName, etsysPolicyProfileRowStatus, etsysPolicyProfilePortVidStatus, etsysPolicyProfilePortVid, etsysPolicyProfileRulePrecedence </UL> The values that you are seeking are not apparently available to SNMP. Fri, 14 Mar 2014 02:54:00 GMT Paul_Poyant 2014-03-14T02:54:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/netsight-ap-3630-not-completely-discovered/m-p/45426#M6157 Hello, we have some AP 3630 and their status on NetSight Console is "Contact Established" but NetSight can't show the other information about version, s/n , mac-address and on Topology Map the APs appears with a "question mark" icon and without any connection to the switches.<BR /> <BR /> For us is very important know the information of AP and where the AP are connected: why we can't obtain these details from NetSight Console and Topology Map?<BR /> Thanks a lot. Best Regards Thu, 13 Mar 2014 21:59:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/netsight-ap-3630-not-completely-discovered/m-p/45426#M6157 SC-Lantech 2014-03-13T21:59:00Z https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/netsight-ap-3630-not-completely-discovered/m-p/45427#M6158 Though a "thick mode" AP3630 (by design, not under a wireless controller) does support SNMPv3, its effectiveness is somewhat constrained by the minimal number of supported MIBs. This is what we received from a full MIB walk of a lab AP3630:<BR /> <UL> One of each: sysDescr, sysObjectID, sysUpTime, sysContact, sysName, sysLocation, sysServices One for each of three ports: ifIndex, ifDescr, ifAdminStatus, ifOperStatus One of each: etsysPolicyProfileMaxEntries, etsysPolicyProfileNumEntries, etsysPolicyProfileLastChange, etsysPolicyProfileTableNextAvailableIndex, etsysPolicyProfileName, etsysPolicyProfileRowStatus, etsysPolicyProfilePortVidStatus, etsysPolicyProfilePortVid, etsysPolicyProfileRulePrecedence </UL> The values that you are seeking are not apparently available to SNMP. Fri, 14 Mar 2014 02:54:00 GMT https://community.extremenetworks.com/t5/extremecloud-iq-site-engine/netsight-ap-3630-not-completely-discovered/m-p/45427#M6158 Paul_Poyant 2014-03-14T02:54:00Z