topic RE: Using FlexView to aggregate Client information , how to select OIDs? in ExtremeCloud IQ- Site Engine Management Center

Using FlexView to aggregate Client information , how to select OIDs?

Hunt_Liao — Mon, 05 Oct 2015 07:15:00 GMT

Dear All

I try to using FlexView to aggregate client's information (IP, MAC, and which port he come from) on swirch

In switch like 430 , 440 it seem no problem, and OIDs I us like:

but the same FlexView I using to show BD8806 's client information , the port will show 6XX 5XX:

Does it need to using different OIDs to show real port on BD ? or it 's using same OIDs , but 645 means slots 6's port 45, it has slot 's mark before real port number?

the second question is I also export this result to html and csv file .

for html it lost mac address 's information

for csv file it lost ReqID

Does it need to change any options 's setting for showing full information when I export?

My Netsight 's version was 6.2.0.221.

Thank for everyone's help.

Hunt.Liao
2015/10/5 10:15 AM
Tiwan

RE: Using FlexView to aggregate Client information , how to select OIDs?

Bharathiraja__S — Mon, 05 Oct 2015 08:04:00 GMT

Hi Hunt,

What all are the exos versions for X430, 440 and BD ?

Thanks,
Suresh.B

RE: Using FlexView to aggregate Client information , how to select OIDs?

Hunt_Liao — Mon, 05 Oct 2015 09:18:00 GMT

Dear suresh

switch 's version 15.3
BD 's version 12.4

Did you mean it different OIDs between two version so I get wrong show ?

Hunt.Liao
2015/10/05 12:07 PM
Taiwan

RE: Using FlexView to aggregate Client information , how to select OIDs?

Murphy__Daniel — Mon, 05 Oct 2015 19:13:00 GMT

Question 2: - Export issues with FlexViews there were several bugs corrected in 6.3 related to Export showing consistently the same columns between CSV/HTML. Are you able to upgrade?